C120超高强钢纤维混凝土抗压强度影响研究  

Research on the Influencing Factors of Compressive Strength of C120 Ultra-high Strength Steel Fiber Reinforced Concrete

作　　者：樊永亮 梁进辉 张祚刚 王永刚 Fan Yongliang;Liang Jinhui;Zhang Zuogang;Wang Yonggang(Beijing Qiaochang Concrete Mixing Co.Ltd.,Beijing 102205;Beijing High Strength Yiyuan Concrete Co.Ltd.,Beijing 102209;Beijing Bannuo Concrete Co.Ltd.,Beijing 102205;Beijing Zhengfu Concrete Co.Ltd.,Beijing 110018)

机构地区：[1]北京桥昌混凝土搅拌有限公司,北京102205 [2]北京高强亿圆混凝土有限责任公司,北京102209 [3]北京班诺混凝土有限公司,北京102205 [4]北京正富混凝土有限责任公司,北京110018

出　　处：《江西建材》2024年第7期18-20,共3页

摘　　要：为配制C120强度等级钢纤维混凝土,改善混凝土力学性能,文中主要对不同品牌水泥、水胶比、骨料搭配比例、钢纤维和养护方式对超高强钢纤维混凝土抗压强度的影响规律进行试验研究。研究结果表明,冀东水泥体系、金马启新水泥体系60 d抗压强度最优,均超过130 MPa;单纯降低水胶比,混凝土抗压强度无法继续提高;当钢纤维掺量为12%时,混凝土60 d抗压强度达到131.8 MPa,为15%掺量纤维强度的104.4%。In order to successfully prepare C120 strength grade steel fiber concrete and improve the mechanical properties of concrete,this paper mainly studies the influence of different brands of cement,water glue ratio,aggregate collocation ratio,steel fiber and curing mode on the compressive strength of ultra-high strength steel fiber concrete.The results show that the 60d compressive strength of Jidong Cement system and Jinma Qixin cement system is optimal,both exceeding 130 MPa;the compression strength of concrete cannot be improved;when the content of steel fiber is 12%,the compressive strength of concrete 60d reaches 131.8MPa,which is 104.4%of the strength of 15%.

关 键 词：超高强混凝土 钢纤维 配合比设计 制备技术 抗压强度 

分 类 号：TU528[建筑科学—建筑技术科学]