适应不同热值的垃圾焚烧炉炉型及运行参数研究  

Research on the Type and Operating Parameters of Garbage Incinerator Adapting to Different Calorific Values

作　　者：武金玉 周洪权 尹丽洁 Wu Jinyu;Zhou Hongquan;Yin Lijie(Shanghai Environmental Group Renewable Energy Operation Management Co.,Ltd.,Shanghai 200336,China;Shanghai Environmental Sanitation Engineering Design Institute Co.,Ltd.,Shanghai 200232,China;Tongji University,Shanghai 201804,China)

机构地区：[1]上海环境集团再生能源运营管理有限公司,上海200336 [2]上海环境卫生工程设计院有限公司,上海200232 [3]同济大学,上海201804

出　　处：《广东化工》2024年第22期109-111,共3页Guangdong Chemical Industry

基　　金：上海城投科技创新计划(CTKY-CYHYD-2021-001);上海市优秀技术带头人计划资助(21XD1434000)。

摘　　要：国内不同区域垃圾热值变化较大,同时随着垃圾分类的开展,垃圾热值逐步提高趋势明显,有必要对不同热值的垃圾进行焚烧炉设计优化。基于上海某厂基本炉型,通过数值模拟,在再循环烟气量优化基础上,针对四种典型热值垃圾,分析燃烧温度、速度等参数分布,提出运行优化方案。同时针对不同热值垃圾,设计新炉型并完成仿真验证。The calorific value of garbage varies greatly in different regions of China,and with the development of garbage classification,the trend of garbage calorific value gradually increases.It is necessary to optimize the design of incinerators for garbage with different calorific values.Based on the basic furnace type of a certain factory in Shanghai,numerical simulation was conducted to optimize the amount of recycled flue gas.For four typical heat value garbage,the distribution of combustion temperature,speed and other parameters of garbage with different heat values was analyzed,and an operation optimization plan was proposed.At the same time,design a new furnace type and complete simulation verification for garbage with different calorific values.

关 键 词：垃圾焚烧炉 数值仿真 炉型 一次风 

分 类 号：X705[环境科学与工程—环境工程]