检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宋雯 SONG Wen(AVIC Shenyang Liming Aero-Engine(Group)Corporation,Ltd.,Shenyang,Liaoning Province,110043 China)
机构地区:[1]中国航发沈阳黎明航空发动机有限责任公司,辽宁沈阳110043
出 处:《科技资讯》2024年第22期145-147,共3页Science & Technology Information
摘 要:由于航空复合材料零件的性能参数要求较高,导致锻造产出的合格率难以得到有效保障,为此,提出自动化生产在航空复合材料零件锻造中的应用研究。首先,利用有限元分析软件ANSYS构建了航空复合材料零件有限元模型,通过模拟零件的受力特点和边界条件对航空复合材料零件锻造的参数进行优化;其次,在生产阶段,引入了自动化生产技术,以满足零件设计要求的有限元模型参数为基准,控制各个加工环节,实现对零件的锻造生产。在测试结果中,各设计参数的合格率始终在95.0%以上,最大值达到了98.4%,应用效果较好。Due to the high requirements of performance parameters of aviation composite parts,it is difficult to ef⁃fectively guarantee the qualification rate of forging output,so the application research of automatic production in the forging of aviation composite parts is proposed.Firstly,a finite element model of aviation composite parts is con⁃structed by using the finite element analysis software ANSYS,and the parameters of forging aviation composite parts are optimized by simulating the force characteristics and boundary conditions of the parts.Secondly,in the production stage,automated production technology is introduced to meet the finite element model parameters of the part design requirements as the benchmark,control each processing link,and realize the forging production of parts.In the test results,the pass rate of each design parameter is always above 95.0%,and the maximum value reaches 98.4%,indicating good application effect.
关 键 词:航空复合材料零件有限元模型 受力特点 边界条件 参数优化 自动化生产技术 合格率
分 类 号:TG316[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200