机构地区:[1]Department of Electro‑Mechanical Systems Engineering,Korea University,Sejong 30019,Republic of Korea [2]Department of Materials Science and Engineering,Korea Advanced Institute of Science and Technology(KAIST),Daejeon 34141,Republic of Korea [3]National Creative Research Initiative Center for Multi‑Dimensional Directed Nanoscale Assembly,Korea Advanced Institute of Science and Technology(KAIST),Daejeon 34141,Republic of Korea [4]Department of Mechanical Engineering,Korea Advanced Institute of Science and Technology(KAIST),Daejeon 34141,Republic of Korea [5]Department of Nano Manufacturing Technology,Korea Institute of Machinery and Materials(KIMM),Daejeon 34103,Republic of Korea [6]Radioisotope Research Division,Korea Atomic Energy Research Institute(KAERI),Daejeon 34057,Republic of Korea
出 处:《Advanced Fiber Materials》2024年第6期1927-1941,共15页先进纤维材料(英文)
基 金:financially supported by the National Creative Research Initiative(CRI)Center for Multi-Dimensional Directed Nanoscale Assembly(2015R1A3A2033061);a Creative Challenge research grant(RS-2023-00248902)through the National Research Foundation of Korea(NRF),funded by the Ministry of Science;supported by the Collabo R&D between Industry,Academy,and Research Institute(RS-2024-00428937)funded by the Ministry of SMEs and Startups(MSS,Korea);This study was also supported by the Development Program of Machinery and Equipment Industrial Technology(20018235,Development of an inline nanoimprinter for nanophotonic device)funded by the Ministry of Trade,Industry,&Energy(MI,Korea),the Ministry of Culture,Sports,and Tourism,and the Korea Creative Content Agency(Project Number:R2022020033);It was also supported by a National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.2021R1A2C3008742).
摘 要:Fiber supercapacitors(FSs)based on transition metal oxides(TMOs)have garnered considerable attention as energy stor-age solutions for wearable electronics owing to their exceptional characteristics,including superior comfortability and low weights.These materials are known to exhibit high energy densities,high specific capacitances,and fast redox reactions.However,current fabrication methods for these structures primarily rely on chemical deposition,often resulting in undesir-able material structures and necessitating the use of additives,which can degrade the electrochemical performance of such structures.Herein,physically deposited TMO nanoribbon yarns generated via delamination engineering of nanopatterned TMO/metal/TMO trilayer arrays are proposed as potential high-performance FSs.To prepare these arrays,the target materials were initially deposited using a nanoline mold,and subsequently,the nanoribbon was suspended through selective plasma etching to obtain the desired twisted yarn structures.Because of the direct formation of TMOs on Ni electrodes,a high energy/power density and excellent electrochemical stability were achieved in asymmetric FS devices incorporating CoNixOy nanoribbon yarns and graphene fibers.Furthermore,a triboelectric nanogenerator,pressure sensor,and flexible light-emitting diode were synergistically combined with the FS.The integration of wearable electronic components,encompassing energy harvesting,energy storage,and powering sensing/display devices,is promising for the development of future smart textiles.
关 键 词:Fiber supercapacitor Transition metal oxide Nanoribbon yarn Wearable devices NANOSTRUCTURING
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...