大型压缩机组撬装底座水平度分析处理关键技术  

KEY TECHNOLOGY FOR ANALYZING AND PROCESSING THE LEVELNESS OF SKID-MOUNTED BASES OF LARGE COMPRES-SOR UNITS

作　　者：张程 张本权 佟永龙 张弛 于小丹 Zhang Cheng;Zhang Benquan;Tong Yonglong;Zhang Chi;Yu Xiaodan(Shengu Group Co.,Ltd.,Shenyang,Liaoning,110869)

机构地区：[1]沈鼓集团股份有限公司,辽宁沈阳110869

出　　处：《石油化工安全环保技术》2024年第6期37-39,I0003,共4页Petrochemical Safety and Environmental Protection Technology

基　　金：沈阳市重大关键核心技术攻关专项“复杂工况下大型PTA压缩机组高效率、高可靠、高匹配性关键技术攻关”(项目编号20-202-1-06)。

摘　　要：对大型压缩机撬装底座在现场安装过程中的水平度进行了测量,分析了水平度超标现象产生的原因,提出了两种改善方案来降低底座的水平度,建立了底座的实体模型,用有限元方法分析了底座的水平度,并将分析结果和实测结果进行比较,从而验证改善方案的有效性。The levelness of large-scale compressor skid-mounted base was measured in the process of field installation and the causes of excess levelness were an-alyzed.Then two improvement schemes were proposed to reduce the levelness of the base;the solid model of the base was established;the levelness of the base was ana-lyzed by adopting finite element method;the analysis re-sults were compared with the measured results,thus the effectiveness of the improvement scheme was verified.

关 键 词：压缩机 撬装底座 水平度 有限元分析 改善方案 

分 类 号：TQ051.21[化学工程]