硫化胶耐磨性能的影响因素分析  

Analysis of Factors Affecting Wear Resistance of Vulcanizates

作　　者：王文博 赵红霞 李云峰 王鑫[2] 杨振林 俞正洲 WANG Wenbo;ZHAO Hongxia;LI Yunfeng;WANG Xin;YANG Zhenlin;YU Zhengzhou(Shandong Yanggu Huatai Chemical Co.,Ltd,Yanggu 252300,China;Qilu University of Technology,Ji’nan 250353,China)

机构地区：[1]山东阳谷华泰化工股份有限公司,山东阳谷252300 [2]齐鲁工业大学,山东济南250353

出　　处：《橡胶科技》2024年第12期712-715,共4页Rubber Science and Technology

摘　　要：研究硫化胶耐磨性能的影响因素。结果表明:随着老化时间的延长,硫化胶的DIN磨耗量增大,耐磨性能降低;高温下硫化胶的DIN磨耗量大于在常温下的磨耗量;随着磨耗里程的增加,硫化胶的阿克隆磨耗量呈增大趋势;阿克隆试验机的磨耗角度对低炭黑用量胶料的磨耗量影响较大,磨耗角度越大,硫化胶的阿克隆磨耗量越大;湿磨条件下硫化胶的DIN磨耗量远小于干磨条件下的DIN磨耗量。The factors affecting the wear resistance of vulcanizates were studied.The results showed that,with the prolongation of aging time,the DIN abrasion loss of vulcanizates increased and the wear resistance decreased.The abrasion loss of vulcanizates at high temperatures was greater than that at low temperatures.With the increase of wear mileage,the Akron abrasion loss of vulcanizates showed an increasing trend.The wear angle of the Akron testing machine had a significant impact on the abrasion loss of vulcanizates with a low dosage of carbon black,the larger the wear angle was,the greater the abrasion loss was.The DIN abrasion loss under wet grinding conditions was much smaller than that under dry grinding conditions.

关 键 词：硫化胶 耐磨性能 老化时间 温度 磨耗角度 磨耗里程 

分 类 号：TQ330.73[化学工程—橡胶工业]