轻小型补偿脉冲发电机模块化组网关键参数匹配设计  

Key parameter matching design of modular networking for lightweight compulsators

作　　者：朱博峰 赵彤阳 张晓 戴宇峰 马涛 ZHU Bofeng;ZHAO Tongyang;ZHANG Xiao;DAI Yufeng;MA Tao(National Key Laboratory of Electromagnetic Energy,Naval Univ.of Engineering,Wuhan 430033,China)

机构地区：[1]海军工程大学电磁能技术全国重点实验室,武汉430033

出　　处：《海军工程大学学报》2024年第6期25-30,45,共7页Journal of Naval University of Engineering

基　　金：国家自然科学基金资助项目(92166205,92366302,52107173)。

摘　　要：针对补偿脉冲发电机模块化设计和负载端多样化需求的关键参数匹配问题,分别从电机本体和典型负载两个角度,通过数学建模和物理仿真的方法分析研究了相关关键参数对装置系统整体性能的影响规律,并进一步总结了适用于典型负载需求的补偿脉冲发电机关键参数设计方法。该研究结论对补偿脉冲发电机的多样化推广应用具有较高的参考价值,并有助于实现脉冲功率电源系统的轻小化和实用化。Aiming at the problem of key parameters matching between the modular design of pulsed al-ternator and the diversified demands of multiple loads.The influence law of relevant key parameters on the overall performance are analyzed and studied from the perspectives of pulsed alternator module and its typical load respectively by using mathematical modeling and physical simulation methods.And the general design method of pulsed alternator module is further summarized which was suitable for different load demands.The conclusion has reference value for the promotion and application of pulsed alternators,and is helpful for miniaturization and practicality of the pulsed power supply sys-tem.

关 键 词：装置 脉冲功率电源 补偿脉冲发电机 并联组网 参数匹配 

分 类 号：TM303[电气工程—电机]