检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李昕阳 李隆[1,2] 任嘉欣 贺政隆 石镨 宁江浩 张春玲 LI Xin-yang;LI Long;REN Jia-xin;HE Zheng-long;SHI Pu;NING Jiang-hao;ZHANG Chun-ling(Faculty of Science,Xi′an University of Architecture&Technology,Xi′an 710055,China;Institute for Applied Physics,Xi′an University of Architecture&Technology,Xi′an,710055,China)
机构地区:[1]西安建筑科技大学理学院,陕西西安710055 [2]西安建筑科技大学应用物理研究所,陕西西安710055
出 处:《激光与红外》2024年第12期1815-1821,共7页Laser & Infrared
基 金:国家自然科学基金项目(No.11705136)资助。
摘 要:为了解决激光二极管(Laser Diode,LD)端面泵浦的热容激光器在泵浦阶段会在晶体内部产生大量废热的问题,由LD端面泵浦激光晶体的工作特点,建立了泵浦阶段无冷却、端面与空气热交换的Yb∶YAG复合晶体热模型。基于热传导理论,使用有限元方法对Yb∶YAG复合晶体的温度场、应力场及热形变场进行了计算,定量分析了键合长度与键合方式对温度场及热形变场的影响。研究结果表明:若以泵浦功率为50 W、泵浦光高斯半径为300μm的激光二极管对晶体尺寸为3 mm×3 mm×4 mm、键合长度为1 mm、键合方式为单端键合,且掺杂浓度为5.0 at.%的Yb∶YAG复合晶体端面进行泵浦,且工作时长为2 s,晶体内部场的最高温升为248℃、最大热形变量为5.9515μm、最大应力为3.70395×10^(9)N/m^(2)。研究结果对激光二极管端面泵浦的Yb∶YAG热容激光器的设计提供了理论依据。In order to solve the problem that the heat capacity laser pumped by laser diode generate a large amount of waste heat inside the crystal during the pumping stage,a thermal model of Yb∶YAG composite crystal without cooling in the pumping stage and heat exchange between the face and air is established by the working characteristics of the LD end-pumped laser crystal.Based on the heat conduction theory,the temperature field,stress field and thermal de-formation field of Yb∶YAG composite crystal are calculated by finite element method.The effects of bonding length and bonding mode on the temperature field and thermal deformation field are quantitatively analyzed.The results show that if a laser diode with a pumping power of 50 W and a pumping optical Gaussian radius of 300μm is used to pump the end face of Yb∶YAG composite crystal with a crystal size of 3 mm×3 mm×4 mm,a bonding length of 1 mm,a bonding mode of single end bonding,and a doping concentration of 5.0 at.%,and the working time is 2 s,The maxi-mum temperature rise of the internal field is 248℃,the maximum thermal shape variable is 5.9515μm,and the max-imum stress is 3.70395×10^(9 )N/m^(2).The research results provide a theoretical basis for the design of Yb∶YAG heat capacity laser pumped by laser diode end face.
关 键 词:固体激光器 热效应 Yb∶YAG晶体 温度场 热形变
分 类 号:TN248.1[电子电信—物理电子学] O437[机械工程—光学工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222