Experimental investigation and numerical analysis on high-efficiency shock vectoring control serpentine nozzles  

作　　者：Zhonghao HUI Jingwei SHI Wentao LIN Li ZHOU Zhanxue WANG Yongquan LIU 

机构地区：[1]School of Power and Energy,Northwestern Polytechnical University,Xi’an 710072,China [2]National Key Laboratory of Science and Technology on Advanced Light-duty Gas-turbine,Xi’an 710129,China [3]Collaborative Innovation Center for Advanced Aero-Engine,Beijing 100191,China

出　　处：《Chinese Journal of Aeronautics》2024年第12期296-324,共29页中国航空学报（英文版）

基　　金：supported by the Science Center for Gas Turbine Project,China(Nos.P2022-B-Ⅱ-010-001 and P2022-B-I-002-001);the National Natural Science Foundation of China(Nos.52376032 and 52076180);the Funds for Distinguished Young Scholars of Shaanxi Province,China(No.2021JC-10);the National Science and Technology Major Project,China(No.J2019-Ⅱ-0015-0036);the Fundamental Research Funds for the Central Universities,China(No.501XTCX2023146001).

摘　　要：The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the “k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angl

关 键 词：Shock vectoring control Serpentine nozzle Auxiliary injection Thrust vectoring performance Flow control 

分 类 号：V231[航空宇航科学与技术—航空宇航推进理论与工程]