基于NURBS曲面的船舶主体三维造型建模研究  

Research on 3D modeling of ship body with NURBS surface

作　　者：宁晓蕾 宫凡舒 NING Xiaolei;GONG Fanshu(Shenyang Ligong University,Shenyang 110159,China)

机构地区：[1]沈阳理工大学,辽宁沈阳110159

出　　处：《舰船科学技术》2024年第23期33-36,共4页Ship Science and Technology

摘　　要：针对船舶主体曲面过于复杂、难以精细表达轮廓与外形的问题,研究NURBS曲面的船舶主体三维造型建模方法。对船舶主体的曲面型值点进行坐标转换处理,将船舶主体的二维平面坐标映射至三维坐标系。利用转换后的曲面型值点,创建船舶主体基准面,生成船舶主体型线。利用船舶主体造型控制点与对应的权因子,确定船舶主体的NURBS曲面。利用船舶主体NURBS曲面控制点,构成3次B样条曲线。通过NURBS曲线反求方法,使曲线分段连接点与B样条曲线定义域内的节点对应,完成船舶主体三维造型模型的构建。实验结果表明,该方法能够有效建立船舶主体三维造型模型,满足船舶设计与性能分析的需求。To address the issue of the complexity of ship body surfaces,which makes it difficult to accurately express contours and shapes,a three-dimensional modeling method for ship bodies using NURBS surfaces is studied.Perform coordinate transformation on the surface shape points of the ship's main body,mapping the two-dimensional plane coordinates of the ship's main body to a three-dimensional coordinate system.Using the converted surface shape value points,create the ship's main reference surface and generate the ship's main body profile.Determine the NURBS surface of the ship's main body using the control points of the ship's main body shape and corresponding weight factors.Construct a cubic B-spline curve using NURBS surface control points of the ship's main body.By using the NURBS curve inverse method,the segmented connection points of the curve correspond to the nodes within the B-spline curve domain,completing the construction of the three-dimensional modeling model of the ship body.The experimental results show that this method can effectively establish a three-dimensional modeling model of the ship body,meeting the needs of ship design and performance analysis.

关 键 词：NURBS曲面 船舶主体 三维造型 型值点 基准面 控制点 

分 类 号：U662[交通运输工程—船舶及航道工程]