多孔聚合物载体的制备及吸附脱除二苯并噻吩的初步探索  

Preparation of Poly-porous Poly(NVP-co-NMBA) Sorbent and Octanol Solution of Adsorption of Dibenzothiophene in Dilute

作　　者：单国彬[1] 刘会洲[1] 

机构地区：[1]中国科学院过程工程研究所分离科学与工程实验室及生化工程国家重点实验室,北京100080

出　　处：《过程工程学报》2002年第6期497-500,共4页The Chinese Journal of Process Engineering

基　　金：国家"973"基金资助项目(编号: G2000048004)

摘　　要：制备了一种多孔的聚合物吸附载体,并考察了在汽油模拟体系进行深度脱硫的效果. 载体的多孔性质有利于提高脱硫的吸附容量和选择性. 在正辛烷与二苯并噻吩组成的模拟体系中,DBT的初始浓度为1.26 g/L,吸附载体用量为50 g/L,测得吸附载体的吸附量为16 mg/g,脱硫率达到88%.A porous polymeric sorbent was prepared with sucrose as pore-forming additive, and the sorbent beads are superior to non-porous polymeric sorbent in adsorption of DBT from a model gasoline. Adsorption of 16 mg/g DBT was achieved under the condition of 50 g/L of the polymeric beads at initial DBT concentration of 1.26 g/L. The sorbent beads are easily desorbed with toluene and can be reused with stabilized adsorption capacity.

关 键 词：N-乙烯吡咯烷酮 吸附脱硫 二苯并噻吩 多孔载体 

分 类 号：TE624.1[石油与天然气工程—油气加工工程]