检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]湖南理工学院土木建筑工程学院,湖南岳阳414000 [2]岳阳市建筑设计院,湖南岳阳414000
出 处:《工程勘察》2015年第3期6-11,共6页Geotechnical Investigation & Surveying
基 金:湖南省自然科学基金资助项目(14JJ4061);湖南省教育厅科学研究项目(11C0619);湖南省教育科学"十二五"规划课题(XJK014CGD036);湖南省普通高等学校教学改革研究课题(2012A09)
摘 要:对不同高径比的板岩试件进行了大量单轴抗压强度试验,获得了3种风化程度的板岩强度随试件高径比增大而非线性减小的关系曲线及二者间的经验关系式。依据板岩标准试件与非标准试件的强度比值,提出了岩石强度尺寸效应系数的概念,绘制了不同风化程度的板岩强度尺寸效应系数随高径比增大而非线性增大的关系曲线,给出了3种不同风化程度板岩强度尺寸效应系数的经验计算式。试验结果分析表明,岩石风化程度不同(强度不同),其强度尺寸效应不同,即岩石强度越大,其尺寸效应越显著。本文经验公式的提出为非标准试件板岩单轴抗压强度的修正提供了新的便利途径,也可为其它各类岩石强度尺寸效应的修正提供参考。According to lots of uniaxial compressive strength test(UCS) results on the slate specimen of different height diameter ratio,three relation curves and empirical formulas between the strengthen and the height diameter ratio are obtained.Based on the strength ratio between standard specimens and test specimens,the concept of rock strength size effect coefficient is put forward,the relation curves between the slate strength size effect coefficient and the height diameter ratio are drawn,and the empirical formulas of rock strength size effect coefficient are given for three different weathering degrees of slate.The results show that the size effect is more obvious with increase of the rock strength.The empirical formulas in this paper could provide a convenient method to correct the slate uniaxial compressive strength of non standard specimen,and also could provide reference for other types of rock.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28