检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨松涛[1,2,3] 王静 汪黎栋[5] 梁培[1] 董前民[1]
机构地区:[1]中国计量学院光学与电子科技学院,浙江杭州310018 [2]浙江大学现代光学仪器国家重点实验室,浙江杭州310027 [3]浙江大学国家光学仪器工程中心,浙江杭州310027 [4]杭州聚光科技有限公司,浙江杭州310052 [5]浙江省计量科学研究院,浙江杭州310013
出 处:《光谱学与光谱分析》2014年第11期2912-2917,共6页Spectroscopy and Spectral Analysis
基 金:国家自然科学基金项目(61006051);浙江省质量技术监督局局立项目(20120304);浙江省重点科技创新团队项目(2010R50020)资助
摘 要:在LED产业飞速发展的今天,LED的光学、色度学和电学参数的精确测试对于提高LED的产品质量、满足市场需求具有重要的意义。研究和分析了LED光学色度学电学参数标准化测量的原理、要求及实现方法,并据此设计并实现了光电算一体化的测试系统,使用NI USB6210数据采集卡在虚拟仪器平台上完成了数据采集、算法设计、界面设计的任务,能够根据所测光谱较好地实现对LED峰值波长、峰值波长半宽度、质心波长、色品坐标、纯度、相关色温、正向电压/电流等参数的综合测试。本系统具有界面简洁、算法可靠、结果稳定的优点,使用该系统分别测得五种单色LED的各项参数,测试结果的平均误差小于3%,可见其测试效果较理想,具有较好的一致性。The standardized measuring principle ,requirements and implementations of the above parameters of LEDs were re-searched and analyzed in the present paper .Then a comprehensive test system involved with optics ,machinery and computer was designed to accomplish data acquisition ,algorithm design and interface design on virtual instrument using NI data acquisition card USB6210 .And convincing results of LEDs’ parameters ,including peak wavelength ,width of half-peak wavelength ,cen-troid wavelength ,chromaticity coordinates ,purity ,correlated color temperature and the forward voltage/current ,were achieved with good consistency based on the measured spectrum .The system owns simple interface ,reliable algorithms and stable re-sults .Respective measurements on five kinds of color of LED result in an average error less than 3% ,which show an ideal per-formance of the system .
分 类 号:TN312.8[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.185