检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:伍永平[1,2] 许英瑞 解盘石[1,2] 王红伟[1,2] 郎丁[1,2] 皇甫靖宇 强旭博 杜玉乾 王乐辰 茹笑辉 王正富 WU Yongping;XU Yingrui;XIE Panshi;WANG Hongwei;LANG Ding;HUANGFU Jingyu;QIANG Xubo;DU Yuqian;WANG Lechen;RU Xiaohui;WANG Zhengfu(Key Laboratory of Western Mine Exploitation and Hazard Prevention,Ministry of Education,Xi'an University of Science and Technology,Xi'an 710054,China;College of Energy Engineering,Xi'an University of Science and Technology,Xi'an 710054,China)
机构地区:[1]西安科技大学教育部西部矿井开采及灾害防治重点实验室,陕西西安710054 [2]西安科技大学能源学院,陕西西安710054
出 处:《工矿自动化》2024年第12期18-26,75,共10页Journal Of Mine Automation
基 金:国家自然科学基金面上项目(52174126,51974230)。
摘 要:俯伪斜开采降低工作面倾角能力有限,倾角60°以上急倾斜中厚煤层长壁综合机械化开采方法亟待突破。以华蓥山煤业股份有限公司绿水洞煤矿3212工作面为工程背景,在俯伪斜开采的基础上提出了双斜开采的采煤方法,并采用物理相似模拟、数值模拟等方法,分析了双斜开采顶板破断矸石充填滑移堆积规律及应力演化过程。结果表明:双斜开采工作面布置需要与矿井开采设计相协调,工作面两巷维护难度大,其中回风巷侧受采动应力影响大,而运输巷与工作面支架的协调配合难度大;双斜开采由于其异形采空区顶板结构,垮落步距更大,其矸石垮落堆积呈倒三角形且存在周期性滑移特征,并且由于大块矸石堆积造成工作面上部和中部的非均匀来压现象;双斜开采原岩应力随工作面的推进逐渐增大,工作面倾斜上部、中部、下部来压强度不同,一般倾斜中上部来压大于下部,但倾斜下部支承压力应力集中系数大于工作面中上部,双斜开采顶板应力演化特征受工作面形状和推进距离的影响,并由于巷道调斜角作用,应力释放范围呈现由倾斜上部至下部逐渐变小的非对称特征。The pseudo-inclined mining has limited capacity to reduce the inclination angle of working face,necessitating breakthroughs in longwall comprehensive mechanized mining methods for steeply inclined mediumthick coal seam with inclination angles exceeding 60°.Taking the 3212 working face in the Lüshuidong Coal Mine of Huayingshan Coal Industry Co.,Ltd.as the engineering background,a double-inclined mining method was proposed based on pseudo-inclined mining.Physical similarity simulation and numerical simulation were employed to analyze the movement and accumulation patterns and stress evolution of the gangue filling after roof breaking in double-inclined mining.The results showed that the layout of the double-inclined working face needed to be coordinated with the mine’s mining design,and the maintenance of two roadways of the working face was challenging.The return air roadway side was significantly affected by the mining stress,while coordinating the transportation roadway with the working face support was also difficult.Due to the irregularly shaped goaf roof structure,the double-inclined mining had larger collapse steps,and its gangue collapse accumulation formed an inverted triangular pattern with periodic sliding characteristics.The accumulation of large gangue blocks resulted in non-uniform pressure in the upper and middle sections of the working face.In doubleinclined mining,the original rock stress increased gradually with the advancing distances of the working face,with varying pressure intensities in the upper,middle,and lower inclined sections of the working face.Generally,the upper and middle sections experienced greater pressure than the lower section,but the stress concentration factor of the support pressure was higher in the lower inclined section compared to that in the upper and middle sections of the working face.The stress evolution characteristics of the roof in double-inclined mining were influenced by the working face shape and advancing distance.Additionally,the roadway inclination angle
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.147.2.112