基于单片机的黑板粉尘监测清除装置设计  

Design of Blackboard Dust Monitoring and Removal Device Based on Single Chip Microcomputer

作　　者：董敏[1] Dong Min

机构地区：[1]南京航空航天大学金城学院

出　　处：《变频器世界》2024年第11期94-97,共4页The World of Inverters

摘　　要：本文提出了一种基于STC89C52单片机的黑板粉尘监测清除装置的设计方案。该装置利用夏普GP2Y1010AUOF粉尘传感器检测黑板附近空气中粉尘的浓度,并将检测结果通过ADC0832芯片进行模数转换后发送给单片机,当粉尘浓度超过设定值时启动除尘装置。经过测试,该装置运行正常,性能稳定。This article proposes a design scheme for a blackboard dust monitoring and removal device based on STC89c52 microcontroller.The device uses the Sharp GP2Y1010AUOF dust sensor to detect the concentration of dust in the air near the blackboard,and sends the detection results to the microcontroller after analog-to-digital conversion through the ADco832 chip.When the dust concentration exceeds the set value,the dust removal device is activated.After testing,the device operates normally and has stable performance.

关 键 词：单片机 粉尘检测 模数转换 

分 类 号：TS736[轻工技术与工程—制浆造纸工程]