基于显著性分析的装配式T梁生产质量影响因素试验研究  

Experimental Study on Influencing Factors of Fabricated T-Beam Production Quality Based on Significance Analysis

作　　者：胡腾飞[1] HU Teng-fei(Anhui Water Conservancy Technical College,Hefei 230011,China)

机构地区：[1]安徽水利水电职业技术学院,安徽合肥230011

出　　处：《兰州文理学院学报(自然科学版)》2025年第1期84-89,共6页Journal of Lanzhou University of Arts and Science(Natural Sciences)

基　　金：安徽省教育厅高校自然科学研究项目(KJ2018A0734)。

摘　　要：依托某工程预制梁厂,对其T梁构件生产质量影响因素进行了系统研究.首先基于试验最佳配合比,在广泛调阅相关文献的基础上,采取试验研究及理论计算的方法探究了恒温温度及升温速率等蒸养参数及3种不同的浇筑振捣工艺对成型后T梁测区回弹强度的影响规律;其次,在试验研究的基础上,基于显著性分析理论,运用方差分析法得到影响T梁构件生产质量的显著性因素;最后对预制T梁的蒸养制度及浇筑振捣工艺进行了调整,最终结果表明,装配式T梁采用调整后的预制方案,其生产质量得到了显著提升.Based on an engineering prefabricated beam factory,the factors affecting the production quality of T-beam members were systematically studied.Firstly,based on the optimum mix ratio of the test and extensive review of relevant literature,the influence of steam parameters such as constant temperature and heating rate and three different casting vibratory processes on the resilience of the measured area of the T-beam after molding was investigated by experimental research and theoretical calculation.Secondly,based on the theory of significance analysis,the significant factors affecting the production quality of T-beam members are obtained by means of variance analysis.Finally,based on the above research,the steam maintenance system and the casting vibration process of the prefabricated T-beam are adjusted.The final results show that the production quality of the prefabricated T-beam has been significantly improved by adopting the adjusted prefabrication scheme.

关 键 词：预制T梁 生产质量 试验研究 振捣浇筑 蒸养制度 显著性分析 

分 类 号：U445.4[建筑科学—桥梁与隧道工程]