600mm铜带拉弯矫直机组的设计探析  

Design Analysis of 600mm Copper Strip Bending and Straightening Unit

作　　者：段胜林[1] DUAN Sheng-lin(Zhongse Technology Co.,Ltd,Luoyang 471003,China)

机构地区：[1]中色科技股份有限公司,河南洛阳471003

出　　处：《世界有色金属》2024年第23期25-27,共3页World Nonferrous Metals

摘　　要：随着电子、通讯和汽车行业的快速发展,用户对铜带平直度和残余应力的要求愈加严格。在此要求下,拉弯矫直技术得到了广泛的应用,问题也得到了较好的解决。几家大型的铜板带加工厂引进了进口的铜带拉弯矫直机组,其使用效果得到了广泛的认可。然而,我国国内的铜带拉弯矫直机组还处于研制阶段,主要以吸收、借鉴国外先进产品为主。笔者参与了我院新设计的一台拉弯矫直机组的安装和调试工作。简要介绍了机组的设备组成,重点介绍了机组的配置特点,并对后续的改进设计提出了一些建议。With the rapid development of the electronics,communication,and automotive industries,users have increasingly strict requirements for the flatness and residual stress of copper strips.Under this requirement,stretch bending straightening technology has been widely applied and the problem has been well solved.Several large copper strip processing factories have introduced imported copper strip bending and straightening units,and their effectiveness has been widely recognized.However,the copper strip bending and straightening unit in China is still in the research and development stage,mainly absorbing and drawing on advanced foreign products.The author participated in the installation and commissioning of a newly designed stretch bending straightening unit in our institute.A brief introduction was given to the equipment composition of the unit,with a focus on the configuration characteristics of the unit,and some suggestions were proposed for future improvement designs.

关 键 词：拉弯矫直机 平直度 残余应力 

分 类 号：TG333.23[金属学及工艺—金属压力加工]