搁置脚载荷下滚装船甲板接触计算与实验分析  

Contact calculation and experimental analysis of deck of Ro-ro ship under undercarriage load

作　　者：蒋嘉奇 徐志亭 蔡忠华[1,3] 王德禹[1,3] JIANG Jiaqi;XU Zhiting;CAI Zhonghua;WANG Deyu(State Key Laboratory of Ocean Engineering,Shanghai Jiao Tong University,Shanghai 200240,China;Marine Design and Research Institute of China,Shanghai 200011,China;Institute of Marine Equipment,Shanghai Jiao Tong University,Shanghai 200240,China)

机构地区：[1]上海交通大学海洋工程国家重点实验室,上海200240 [2]上海船舶及海洋工程设计研究院,上海200011 [3]上海交通大学海洋装备研究院,上海200240

出　　处：《舰船科学技术》2025年第1期1-7,共7页Ship Science and Technology

基　　金：国家自然科学基金资助项目(U2241266)。

摘　　要：运输装置底部的搁置脚与滚装船甲板之间存在着复杂的非线性接触关系,不能简单地将搁置脚载荷视作均布载荷来处理。为探讨在搁置脚载荷作用下船舶甲板结构的接触压力与应力分布,以某钢质甲板结构为研究对象,采用Abaqus对其进行非线性接触数值计算,通过实尺度搁置脚载荷甲板强度实验,对搁置脚不同位置下甲板模型的接触压力、甲板板应力、纵骨应力进行分析,并将实验结果与仿真结果进行对比分析,验证搁置脚与甲板的接触压力分布规律,并在此基础上提出一种针对甲板板的简化计算方法,将复杂的非线性接触计算转变为较为简单的线弹性计算。结果表明,接触压力主要集中在搁置脚前端和横梁附近,以强横梁为代表的强构件是主要承载构件,甲板板高应力区域主要集中在搁置脚底部前端以及横梁附近,实验结果与数值计算结果吻合较好。本文计算模型具有较高的准确性,简化计算方法对滚装船甲板设计及强度计算具有较好的实用性。Complex contact takes place between the undercarriage of equipment and the deck on Ro-Ro ship,so the undercarriage load cannot be simply treated as a uniformly distributed load.In order to investigate the contact pressure and stress distribution between a deck and undercarriage,a steel deck structure is taken as the research object.ABAQUS is used for nonlinear contact numerical calculation from many aspects.Then,the contact pressure,deck plate stress and longitudinal bone stress of the deck model at different positions of the undercarriage are analyzed through the experiment,and the experimental results are compared with the simulation results to verify the distribution law of the contact pressure between the undercarriage and the deck.On this basis,a simplified calculation method for deck plate is proposed,which transforms the complex nonlinear contact calculation into a relatively simple linear elastic calculation.The results show that the contact pressure is mainly concentrated in the front end of the undercarriage and near the web beam,the strong member represented by the strong beam is the main bearing member,and the high stress area of the deck plate is mainly concentrated in the front end of the bottom of the undercarriage and near the beam.The proposed calculation model has good accuracy and the simplified calculation method has good practicability for the deck design and strength calculation of Ro-Ro ships.

关 键 词：搁置脚 甲板 非线性接触 压力分布 简化算法 

分 类 号：U663.6[交通运输工程—船舶及航道工程]