浅谈轮胎部件的胶片热贴合方式及装备  

Discussion on the rubber sheet thermal lamination method and equipment of tire parts

作　　者：杨洪良 Yang Hongliang(Tongli Tyre Co.LTD.,Yanzhou 272100,Shandong,China)

机构地区：[1]通力轮胎有限公司,山东兖州272100

出　　处：《橡塑技术与装备》2025年第2期1-5,共5页China Rubber/Plastics Technology and Equipment

摘　　要：轮胎制造工序中诸多部件是通过预贴合而成,其中三角胶是轮胎制造中的重要的部件,是胎圈部分的主要填充物,起到支撑胎壁及保护胎圈的作用。三角胶胶片贴合方式及装备的选择余地较多,每个轮胎制造厂的制造工艺不一样,从而配置模式也不一样。本文针对原冷贴胶片贴合工艺存在的弊端进行了技改,增加部分装备,把冷贴改为热贴。降低了三角胶贴合胶片工艺存在重复加工的浪费,节省了隔离膜的使用成本且节省部件生产时间。Many components in the tire manufacturing process are pre-laminated.Among them,apex rubber is an important part in tire manufacturing and serves as the main filler for the bead area,supporting the tire wall and protecting the bead.There are various options for the bonding method and equipment for the apex rubber rubber sheet.Each tire manufacturer has a unique manufacturing process,resulting in different configuration modes.This paper presents technical improvements to address the disadvantages of the original cold bonding process,introducing additional equipment to switch from cold bonding to hot bonding.This measure reduces the waste associated with repeated processing in the apex rubber bonding process,saving on the cost of isolation rubber sheet and reducing the production time of components.

关 键 词：热贴 冷贴 隔离膜 胶片贴合装置 挤出机 

分 类 号：TQ330.44[化学工程—橡胶工业]