连退线换辊装置摆动轨道改进  

Improvement of the Swinging Track of the Roll Changing Device for the Continuous Annealing Line

作　　者：代瑞娜 Dai Ruina(Beijing Shougang International Engineering Technology Co.,Ltd.,Beijing100043;Beijing Metallurgical 3D Simulation Design Engineering Technology Research Center,Beijing 100043)

机构地区：[1]北京首钢国际工程技术有限公司,北京100043 [2]北京市冶金三维仿真设计工程技术研究中心,北京100043

出　　处：《冶金设备》2024年第6期131-134,共4页Metallurgical Equipment

摘　　要：本文首先讲述了连退线换辊装置的工作原理,建立了简化模型,分析了原7#、8#线摆动轨道动力不足以及升降机尾部与地面干涉问题的原因,然后提出了改进方法,优化了驱动机构升降机型号、减速电机型号等,最后对优化措施进行了三维模型验证。This article first describes the working principle of the roll changing device for the continuous annealing line,establishes a simplified model,analyzes the reasons for the insufficient power of the swing track of the original 7#8#line and the interference problem between the tail of the elevator and the ground,and then proposes an improvement method to optimize the driving mechanism elevator model,deceleration motor model,etc.Finally,the optimization measures are verified by a three-dimensional model.

关 键 词：连续退火 换辊装置 改进 

分 类 号：TG333.17[金属学及工艺—金属压力加工]