盘式磁滞式张力器性能的仿真与实验分析  

Simulation and Experiment Analysis of Performance of Disk Hysteresis Tensioner

作　　者：米心馨 张昊 刘小龙 崔明浩 焦洋浩 MI Xinxin;ZHANG Hao;LIU Xiaolong;CUI Minghao;JIAO Yanghao(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)

机构地区：[1]南京航空航天大学机电学院,江苏南京210016

出　　处：《机械制造与自动化》2025年第1期166-169,共4页Machine Building & Automation

摘　　要：分析了盘式磁滞式张力器的结构与原理,利用Ansys Maxwell对其性能进行仿真分析。设计转矩测量实验台,测得输入电流与输出转矩的关系,得出各影响因素与张力器输出转矩的关系。仿真与实验结果表明:转子转速对张力器输出转矩的影响极小,当磁极偏角为22.5°、气隙大小为0.2 mm时,盘式磁滞式张力器的使用效果最好。Studies the structure and principle of disk hysteresis tensioner,and simulates and analyzes the performance of the tensioner by Ansys Maxwell.The torque measuring experimental platform is designed,the relationship between the input current and the output torque is measured,and the relationship between the influencing factors and the output torque of the tensioner is obtained.The simulation and experimental results show that the rotor speed has little influence on the output torque of the tensioner.When the magnetic pole deflection angle is 22.5°and the air gap size is 0.2 mm,the disk hysteresis tensioner achieves the best effect.

关 键 词：络筒机 磁滞转矩 转矩传感器 纱线张力器 转矩测量 

分 类 号：TS103.7[轻工技术与工程—纺织工程]