Optimizing Oil Distributor Port for Low-Pulsation Cam-Lobe Hydraulic Motors  

作　　者：Yiman Duan Hao Tan Yu Fang Zhijian Zheng Junhui Zhang Bing Xu Qi Su Chao Zhang 

机构地区：[1]State Key Laboratory of Fluid Power and Mechatronic Systems,Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China [2]National Intelligent Manufacturing Equipment Quality Supervision and Inspection Center,Ningbo 315800,China

出　　处：《Chinese Journal of Mechanical Engineering》2024年第6期225-234,共10页中国机械工程学报(英文版)

基　　金：Supported by National Key R&D Program of China(Grant No.2021YFB3400501)。

摘　　要：High-end equipment always operate in low-speed and heavy-load working environments,highlighting the need for cam-lobe hydraulic motors with excellent speed stability(<1 r/min)and ultrahigh-power rotary output(>1 MW).The successful operation of cam-lobe hydraulic motors relies on the circulation supply of high-and low-pressure oil.However,the switching between high-/low-pressure oil controlled by the oil distributor inevitably causes an obvious pressure impact and speed pulsation,which directly reduces the speed stability of hydraulic motors.Therefore,an optimization design approach for the oil distributor port is proposed to minimize the speed pulsation of cam-lobe hydraulic motors.In the proposed approach,a simulation model that links the oil distributor port structural parameters with the hydraulic motor speed pulsation was developed to clarify the e ect of the oil distributor structural parameters on speed pulsation.Then,an orthogonal analysis method was used to identify the optimized oil distributor port structural parameters while minimizing the hydraulic motor's speed pulsation as much as possible.Finally,several experiments were conducted to validate the e ectiveness and accuracy of the proposed optimization design approach.The experimental results indicate that the pulsation rate of the hydraulic motor equipped with the optimized oil distributor was 62.5%lower than that of the original motor at a working pressure of 25 MPa,which is consistent with the simulation results using the proposed optimization design approach.The findings of this study o er a feasible and e ective approach to guide the design optimization of the oil distributor port for low-pulsation hydraulic motors.

关 键 词：Engineering machinery Hydraulic motor PULSATION Oil distributor port Speed stability Optimization design 

分 类 号：F42[经济管理—产业经济]