镜质组反射率测定实验中手动检测与自动检测对比研究  

Comparative Study on Manual Detection and Automatic Detection in the Experiment of Measuring Vitrinite Reflectance

作　　者：吉同超 黄利杰 史家敏 Ji Tongchao;Huang Lijie;Shi Jiamin(Henan Jinma Energy Co.,Ltd.,Jiyuan Henan 454650,China)

机构地区：[1]河南金马能源股份有限公司,河南济源454650

出　　处：《山西冶金》2024年第11期14-15,18,共3页Shanxi Metallurgy

摘　　要：对黄冈进厂煤分别进行自动和手动镜质组反射率测定,对比二者的区别及优缺点。并利用软件,将二者结果整合,即通过合成二者镜质组反射率分布图,得到新的镜质组反射率分布图。结果表明,新合成的分布图与自动测试分布图结果基本一致,说明自动测试结果更具有代表性,更准确,更加适合后续实验检测的运用。Automatic and manual vitrinite reflectance measurements were conducted on Huanggang factory-incoming coal,and the differences,advantages,and disadvantages between the two were compared.And a software is used to integrate the results of the two,that is,by synthesizing the reflectance distribution maps of the two vitrinite groups,a new vitrinite reflectance distribution map is obtained.The results show that the newly synthesized distribution map is basically consistent with the automatic testing distribution map,indicating that the automatic testing results are more representative,accurate,and suitable for subsequent experimental testing applications.

关 键 词：镜质组反射率 自动检测 手动检测 进厂煤 

分 类 号：TQ533[化学工程—煤化学工程]