基于双观测器的拼接弧线电机改进积分滑模控制策略  

Improved integral sliding mode control strategy for the segmented arc permanent magnet synchronous motor based on dual observer

作　　者：曹兆锦 宋晓莉[1,2] 范壬秋 张超[1,2,3] CAO Zhao-jin;SONG Xiao-li;FAN Ren-Qiu;ZHANG Chao(Nanjing Institute of Astronomical Optics&Technology,Chinese Academy of Sciences,Nanjing 210042,China;CAS Key Laboratory of Astronomical Optics&Technology,Nanjing 210042,China;University of Chinese Academy of Sciences,Beijing 100049,China)

机构地区：[1]中国科学院南京天文光学技术研究所,江苏南京210042 [2]中国科学院天文光学技术重点实验室,江苏南京210042 [3]中国科学院大学,北京100049

出　　处：《中国光学(中英文)》2025年第1期105-113,共9页Chinese Optics

基　　金：国家自然科学基金面上项目(No.12373096,No.11673045)。

摘　　要：拼接弧线电机凭借其高转矩比和低速稳定运行等优点,为大口径天文望远镜观测提供了高性能驱动技术支持。电机运行过程中存在的如参数畸变、谐波等其他内外部干扰,都对提高电机性能提出了挑战。因此,本文提出一种基于新型趋近律的积分滑模控制器,同时结合扩张状态观测器与负载观测器的混合控制策略,旨在优化传统滑模控制并增强系统的抗干扰能力。传统趋近律参数较为繁杂且不能很好地抑制抖振,新型的趋近律简化了参数,有效克服了系统抖振。其次,采用扩张状态观测器对反馈转速进行估计,然后结合q轴电流信息和估计出的转速数据作为负载转矩观测器输入,进一步提高了负载观测性能,并将负载观测值转换为电流进行前馈补偿,用以提高电机的抗干扰性能。仿真和实验结果表明:所提出的双观测器方法能够有效观测电机的转速和负载值,显著增强了电机的抗负载扰动能力;同时,采用新型滑模速度控制器降低了电机转速超调量,并在一定程度上抑制了滑模抖振,为弧线电机在大口径天文望远镜的高精度观测应用提供了理论和实验支持。With its high torque ratio and stable low-speed operation,the segmented arc permanent magnet synchronous motor(SAPMSM)provides high-performance drive technology support for large-aperture astronomical telescope observations.Improving the motor’s performance is challenging due to various internal and external interferences during its operation,such as parameter distortion,harmonics,etc.To this end,this paper proposes an integral sliding mode controller based on a new reaching law and a hybrid control strategy that combines an expanded state observer and a load observer,aiming to optimize the traditional sliding mode control and enhance the system’s anti-interference ability.The traditional reaching law has complicated parameters and cannot suppress chattering well.The new reaching law simplifies the parameters and effectively overcomes the system chattering.Second,an expanded state observer is used to estimate the feedback speed.Then,the q-axis current information and the estimated speed data are combined as the input of the load torque observer.This further improves the load observation performance and converts the load observation value into current for pre-processing.Feedback compensation is used to improve the motor’s anti-interference performance.Simulation and experimental results show that the proposed dual observer method can effectively observe the motor's speed and load,significantly enhancing the motor’s ability to resist load disturbances.At the same time,the new sliding mode speed controller reduces the motor speed overshoot and suppresses the buffeting of the sliding mode to a certain extent,providing theoretical and experimental support for arc motors in high-precision observation applications of large-aperture astronomical telescopes.

关 键 词：大型天文望远镜 拼接弧线永磁同步电机 双观测器 改进滑模控制 

分 类 号：TH751[机械工程—仪器科学与技术]