大口径宽温反射镜中心支撑结构设计  

Design of the central support structure of a large aperture mirror with a wide working temperature

作　　者：袁健 裴思宇 霍占伟 张冠宸 张雷 YUAN Jian;PEI Si-yu;HUO Zhan-wei;ZHANG Guan-chen;ZHANG Lei(Chang Guang Satellite Technology Co.,Ltd.,Changchun 130033,China)

机构地区：[1]长光卫星技术股份有限公司,吉林长春130033

出　　处：《中国光学(中英文)》2025年第1期150-159,共10页Chinese Optics

基　　金：吉林省科技发展计划资助项目(No.20210509052RQ)。

摘　　要：为提升低轨卫星与地面站间激光链路的通信质量,商业地面站内望远镜配备的大口径主镜需适应户外环境中恶劣的温度条件。针对某通光口径Φ500 mm的高精度主镜组件,提出一种使用室温硫化硅橡胶的中心支撑方案。镜体采用微晶材料,衬套和支撑筒均为钛合金材质。1 mm厚的胶层在卸载镜体自身重力的同时,可有效减小组件内部热应力。胶层的厚度和高度可通过仿真优化确定,特制的粘接工装可准确控制胶层形状和厚度,衬套上的通气孔促进了胶层的充分固化。仿真分析表明:主镜在40°C温度均匀变化工况下的面形精度RMS值为4.199 nm;光轴竖直重力工况下的RMS值为13.748 nm;光轴水平重力工况下的RMS值为4.187 nm,镜体最大倾角和位移分别为4.722″和3.597μm,组件基频达到53.45 Hz;实测主镜的面形精度为RMS 0.017λ(λ=632.8 nm),经大范围高低温循环试验及真空镀膜后,主镜均可保持高精度面形。文中支撑结构可以显著提升高精度反射镜的温度适应能力,在地面大型光电设备中具有广阔的应用前景。In order to improve the communication quality of LEO-OGS laser links,commercial ground station telescopes equipped with large aperture primary mirrors must be able to withstand extreme outdoor temperature.A central support scheme using room-temperature vulcanizing silicone rubber was proposed for a high-precision primary mirror with an optical aperture of 500 mm.The mirror is made of microcrystal material,and both of the bushing and the supporting cylinder are made of titanium alloy.A 1-mm-thick adhesive layer is used,which can effectively reduce the thermal stress inside the assembly during temperature changes while unloading the gravity of the mirror blank.The thickness and height of the adhesive layer are determined by optimization.A specially designed fixture can accurately control the shape and thickness of the adhesive layer.The ventilation holes on the bushing promote its full solidification.Simulation analysis indicates that the surface shape accuracy of the primary mirror is 4.199 nm in RMS under 40°C temperature variation,with 13.748 nm under vertical gravity and 4.187 nm under horizontal gravity,accompanied by the maximum mirror inclination and displacement of 4.722"and 3.597μm,and the fundamental frequency of the assembly reaches 53.45 Hz.The measured surface shape accuracy of the primary mirror is RMS 0.017λ(λ=632.8 nm).The surface can maintain high precision after extensive heat cycling tests and vacuum coating.The central support structure can significantly improve the temperature adaptability of precise mirrors and has broad application prospects in large-scale ground optoelectronic equipment.

关 键 词：宽温反射镜 室温硫化硅橡胶 热稳定性 地基望远镜 激光通信 

分 类 号：V447.1[航空宇航科学与技术—飞行器设计]