钢框架装配式高层建筑AAC墙板抗压力学性能研究  

Research on Compressive Mechanical Property of AAC Wallboard in Steel Frame Prefabricated High-rise Building

作　　者：宋术武 杨刚[2] 李文雄 刘振华[4] SONG Shuwu;YANG Gang;LI Wenxiong;LIU Zhenhua(Zhucheng River Maintenance Center,Weifang 262299,Shandong,China;China Water Resources Beifang Investigation,Design and Research Co.,Ltd.,Tianjin 300222,China;POWERCHINA STECOL Corporation,Tianjin 300392,China;School of Civil Engineering,Shandong University,Jinan 250061,Shandong,China)

机构地区：[1]诸城市河道维护中心,山东潍坊262299 [2]中水北方勘测设计研究有限责任公司,天津300222 [3]中国电建市政建设集团有限公司,天津300392 [4]山东大学土建与水利学院,山东济南250061

出　　处：《工程技术研究》2025年第1期29-31,共3页Engineering and Technological Research

摘　　要：蒸压加气混凝土(autoclaved aerated concrete, AAC)墙板已成为装配式建筑中常用的墙体结构形式之一,但是受配筋形式和厚度等参数的影响,其力学性能存在差异。为此,文章依托某钢框架装配式高层建筑AAC墙板工程,采用数值计算分析方法,建立AAC墙板力学模型,研究不同配筋形式和厚度对AAC墙板抗压力学性能的影响,旨在为AAC墙板工程设计与施工提供参考。Autoclaved aerated concrete(AAC)wallboard has become one of the commonly used wall structure forms in prefabricated buildings,but there is difference in its mechanical properties due to the influence of parameters such as reinforcement form and thickness.For this reason,based on the AAC wallboard engineering of a steel frame prefabricated high-rise building,this paper establishes the mechanical model of AAC wallboard by numerical calculation analysis method,and studies the infl uence of different reinforcement forms and thickness on the compressive mechanical properties of AAC wallboard,aiming to provide reference for the design and construction of AAC wallboard engineering.

关 键 词：装配式建筑 AAC墙板 力学性能 配筋形式 

分 类 号：TU741[建筑科学—建筑技术科学]