聚全氟乙丙烯纤维与其他纤维混合物定量方法研究  

Study on quantitative method of polyperfluorinated ethylene-propylene fiber and other fiber mixtures

作　　者：陈安城 CHEN Ancheng(Fujian Fiber Inspection Center,Fujian Key Laboratory of Textile product Testing Technology,Fuzhou,Fujian 350026,China)

机构地区：[1]福建省纤维检验中心、福建省纺织产品检测技术重点实验室,福建福州350026

出　　处：《中国纤检》2025年第2期42-47,共6页China Fiber Inspection

摘　　要：本文采用显微镜法、燃烧法、化学溶解法、红外光谱法对聚全氟乙丙烯纤维进行定性鉴别试验分析,总结得出聚全氟乙丙烯纤维的纤维截面形态、燃烧性能、化学溶解性能、纤维红外光谱吸收图。参照标准以及文献选用相应试剂进行化学溶解试验,得出聚全氟乙丙烯纤维在不同化学试剂中的质量修正系数并制定定量分析方案。最后通过选用相应方法对多组聚全氟乙丙烯纤维与其他纤维混合物进行验证试验,为该混纺产品的定量分析提供了检测依据。In this paper,the identification test of poly(perfluorinated ethylene propylene)fiber was carried out by microscopy,combustion method,chemical dissolution method and infrared spectroscopy.The fiber cross section morphology,combustion property,chemical dissolution property and fiber infrared spectral absorption diagram of poly(perfluorinated ethylene propylene)fiber were summarized.According to the standard and literature,the chemical dissolution test was carried out with the corresponding reagent,and the quality correction coefficient of polyperfluoroethylene propylene fiber in different chemical reagents was obtained and the quantitative analysis scheme was developed.Finally,the validation test of polyperfluorinated ethylene propylene fiber and other fiber mixture was carried out by selecting the coresponding method,which provided the basis for the quantitative analysis of the blended product.

关 键 词：聚全氟乙丙烯纤维 高性能 定性分析 定量分析 

分 类 号：TS107[轻工技术与工程—纺织工程]