飞机电搭接装置腐蚀防护技术要求  

Technical Requirement for Corrosion Protection of Aircraft Electrical Bonding Devices

作　　者：王希彬 郁大照 王琳 胡家林 WANG Xibin;YU Dazhao;WANG Lin;HU Jialin(School of Basic Science for Aviation,Naval Aviation University,Shandong Yantai 264001,China)

机构地区：[1]海军航空大学航空基础学院,山东烟台264001

出　　处：《装备环境工程》2025年第2期40-45,共6页Equipment Environmental Engineering

摘　　要：为解决我国飞机电搭接装置腐蚀影响装备质量和飞行安全的问题,在国内外相关标准手册研究基础上,提出了飞机电搭接装置腐蚀防护技术要求。首先,从选用原则和要求方面,提出了电搭接装置防腐蚀选型要求;其次,从腐蚀检查、腐蚀表面清洗和腐蚀产物清理等方面,提出了电搭接装置腐蚀表面处理要求;最后,从防腐蚀安装、搭接电阻测量和安装后的防腐蚀处理方面,提出了电搭接装置防腐蚀安装要求。该研究可为飞机电搭接装置外场检查、技术修理和维护使用中的腐蚀防护提供技术指导和实施依据。The work aims to put forward technical requirements for corrosion protection of aircraft electrical bonding de-vicesbased on the research of relevant standard manuals at home and abroadso as to solve the problem of corrosion affecting equipment quality and flight safety of aircraft electrical bonding devices in China.Firstly,from the principles and requirements of selection,the selection requirements for anti-corrosion of electricalbonding devices were proposed;Secondly,from the as-pects of corrosion inspection,corrosion surface washing,and corrosion product cleaning,the requirements for corrosion surface treatment of the electricalbonding device were putforward;Finally,the requirements for anti-corrosion installation of electrical-bonding devices were put forward from the aspects of anti-corrosion installation,bonding resistance measurement,and anti-corrosion treatment after installation.This study can provide technical guidance and implementation basis for corrosion protection in the field inspection,technical repair,and maintenance of aircraft electrical bonding devices.

关 键 词：电搭接装置 腐蚀防护 搭接线 腐蚀检查 腐蚀表面处理 搭接电阻 

分 类 号：TG174[金属学及工艺—金属表面处理]