3D打印发泡硅橡胶的研究进展  

Research Progress of 3D Printing Foamed Silicone Rubber

作　　者：李昌林 余松林 芦艾[1] LI Changlin;YU Songlin;LU Ai(Institute of Chemical Materials,China Academy of Engineering Physics,Mianyang 621900,China)

机构地区：[1]中国工程物理研究院化工材料研究所,四川绵阳621900

出　　处：《橡胶工业》2025年第3期234-239,共6页China Rubber Industry

基　　金：国家自然科学基金-NSAF联合基金重点项目(22075258)。

摘　　要：介绍3D打印发泡硅橡胶的研究进展。概述发泡硅橡胶的3D打印技术,包括直接墨水书写和立体光固化技术,分别指出这些技术的优势与存在问题及应用领域;从3D打印硅橡胶墨水的流变性能调控和3D打印发泡硅橡胶的结构调控等方面,综述发泡硅橡胶的研究进展,展望发泡硅橡胶3D打印技术的发展前景。The research progress of the 3D printing foamed silicone rubber was introduced.The 3D printing technologies of the foamed silicone rubber,including direct ink writing(DIW)and stereolithography apparatus(SLA)3D printing technologies were summarized,pointing out the advantages,existing problems and application fields of each technology.The research progress of the foamed silicone rubber was overviewed from the aspects of rheological property regulation of the 3D printing silicone rubber ink and the structural regulation of the 3D printing foamed silicone rubber,and the developments of the 3D printing technologies of foamed silicone rubber were prospected.

关 键 词：发泡硅橡胶 3D打印 直接墨水书写 立体光固化 

分 类 号：TQ333.93[化学工程—橡胶工业]