高层与超高层建筑中铝模板施工关键技术研究  

Research on the Key Technologies of Aluminum Formwork Construction inHigh-Rise and Super High-Rise Buildings

作　　者：贾强强 JIA Qiang-qiang(Shandong Binzhou Construction Group Co.Ltd.,Binzhou 256600,China)

机构地区：[1]山东滨州城建集团有限公司,山东滨州256600

出　　处：《工程建设与设计》2025年第4期160-162,共3页Construction & Design for Engineering

摘　　要：分析了铝合金模板在建筑施工中的关键技术,通过对安装准备、模板安装与拆卸、支撑体系安装等方面进行详细分析,提出了一套较为完善的铝合金模板施工技术。结果表明,采用该技术进行施工后,楼层闭水试验的累计渗水量为1.2 mm,显著低于标准临界值,初步验证了该技术的有效性。The key technology of aluminum alloy formwork in building construction is analyzed,and a complete set of installation preparation,formwork installation and disassembly,and support system installation are analyzed in detail.The results show that the cumulative water seepage of the floor closed water test is 1.2 mm,which is significantly lower than the standard critical value,which preliminarily verifies the effectiveness of the technique.

关 键 词：超高层建筑 铝合金模板:施工技术 闭水试验 

分 类 号：TU974[建筑科学—建筑技术科学] TU755.2