Electrohydraulic effect of microsecond pulsed discharge in transformer oils  

作　　者：Hang Wang Cheng Zhang Zhuofei Wang Shuai Zhang Kaihang Guo Tao Shao 

机构地区：[1]Beijing International S&T Cooperation Base for Plasma Science and Energy Conversion,Institute of Electrical Engineering,Chinese Academy of Sciences,Beijing,China [2]University of Chinese Academy of Sciences,Beijing,China

出　　处：《High Voltage》2025年第1期137-145,共9页高电压(英文)

基　　金：National Science Fund for Distinguished Young Scholars,Grant/Award Number:51925703;National Natural Science Foundation of China,Grant/Award Numbers:52261145695,52350072。

摘　　要：The physical process of microsecond pulsed discharge in transformer oil is the foun-dation for studying the initial mechanics of faults in ultra-high voltage transformers.However,the microsecond-scale electrohydraulic effect in transformer oil has not been investigated yet.In this paper,the shock wave and bubble generated by microsecond pulsed discharge in transformer oil between needle-needle electrodes are studied using a Schlieren system with a high-speed camera.The results show that the discharge channel in the 0.1 mm oil gap forms in 9.50μs when the streamer and the first shock wave are observed.The bubble between electrodes expands in the subsequent 218.50μs.Then,the bubble collapses when the second shock wave is observed.The velocities of the first and the second shock wave are 1388.16 and 1465.46 m/s,respectively.With the gap distance increase,all the breakdown voltage,the discharge energy,and the ratio of the mechanical energy to total energy increase,the breakdown current,the acceleration of the container wall,and the velocity of the shock wave decrease.It can be concluded that the first shock wave is generated by the streamer of microsecond pulsed discharge and the second shock wave is induced by the rapid density change due to the bubble collapsing.

关 键 词：BUBBLE EFFECT ACCELERATION 

分 类 号：O35[理学—流体力学]