小型污水处理厂提标改造工程的思考与探索——以某工业园区为例  

The Reflection and Exploration on the Upgrading and Renovation Project of Small Sewage Treatment Plant--A Case Study of an Industrial Park

作　　者：张辉 马蓉 雷旭阳 胡若曦 Zhang Hui;Ma Rong;Lei Xuyang;Hu Ruoxi(Hebei Vocational University of Technology and Engineering,Xingtai,Hebei 054035,China;Hebei Jinpei Environmental protection technology Co.,LTD,Xingtai,Hebei 054000,China)

机构地区：[1]河北科技工程技术职业大学,河北邢台054035 [2]邢台市生态环境保护局辐射环境监测站,河北邢台054000

出　　处：《河北科技工程职业技术大学学报》2025年第1期130-134,共5页Journal of Xingtai Polytechnic College

基　　金：邢台市重点研发计划项目--“工业废水氨氮深度处理技术研究与应用”,项目编号:2020ZC115

摘　　要：某工业园区小型污水处理厂设计处理能力为5000 m^(3)/d,原出水执行《城镇污水处理厂污染物排放标准》(GB18918-2002)表1中的一级A标准要求。为适应当地更加严格的水质要求,对该污水处理厂工艺流程进行了提标改造,增设臭氧氧化和树脂吸附工艺。改造后的污水处理厂运行效能良好,经处理的水质满足《地表水环境质量标准》(GB3838-2002)IV类标准,同时也满足了当地重点控制区排放限值标准要求。A small sewage treatment plant in an industrial park,with a designed treatment capacity of 5,000 m^(3)/d,originally discharged effluent meeting the Class 1A standards specified in Table 1 of the“Discharge Standard of Pollutants for Municipal Wastewater Treatment Plants”(GB18918-2002).To meet stricter local water quality requirements,the treatment process of the plant was upgraded and renovated,incorporating ozone oxidation and resin adsorption processes.The upgraded plant operates efficiently,with treated water quality meeting the Class IV standards of the“Environmental Quality Standards for Surface Water”(GB3838-2002)and the emission limit requirements of the local key control zone.

关 键 词：提标改造 臭氧氧化 树脂吸附 排放标准 

分 类 号：X703[环境科学与工程—环境工程]