激发剂对陶瓷抛磨废料水泥砂浆力学性能影响研究  

Study on the Effect of Activator on Mechanical Properties of Ceramic Polishing Waste Cement Mortar

作　　者：谌俊[1] 叶跃浩 肖学军[3] CHEN Jun;YE Yuehao;XIAO Xuejun(School of Electromechanical and Automotive Engineering,Qingyuan Polytechnic;Shenzhen Pengcheng Foundation concrete Co.,Ltd.;School of Chemical and Pharmaceutical Engineering,Changzhou Institute of Engineering Technology)

机构地区：[1]清远职业技术学院机电与汽车工程学院 [2]深圳市鹏城基业混凝土有限公司 [3]常州工程职业技术学院化工学院

出　　处：《广东建材》2025年第3期8-12,共5页Guangdong Building Materials

基　　金：广东省教育厅普通高校科研项目,固体工业废料在预拌砂浆中的应用技术(2020KTSCX363);清远市科技计划项目:玻璃纤维生产工业与设备改造应用研究(2019A030).

摘　　要：用陶瓷抛磨废料替代30%水泥,研究不同种类和不同成分激发剂对陶瓷抛磨废料水泥砂浆力学性能影响,进而分析确定最佳成分配比的激发剂。试验结果表明,单掺氯化钙、熟石灰、硫酸钠和三乙醇胺均有较好的激发效果,氢氧化纳未产生激发作用;复合激发剂激发效果一般,最佳激发剂配方为单掺2%氯化钙,水泥砂浆28d强度可达到43MPa。30%cement was replaced by ceramic polishing waste.The effects of different types and different components of exciter on mechanical properties of ceramic polishing waste cement mortar were studied,and the optimal composition of exciter was analyzed and determined.The results show that calcium chloride,hydrated lime,sodium sulfate and triethanolamine have good excitation effect,while sodium hydroxide has no excitation effect.The effect of composite activator is general,and the best formulation of activator is 2%calcium chloride alone,and the strength of cement mortar can reach 43MPa at 28d.

关 键 词：陶瓷抛磨废料 水泥砂浆 激发剂 强度 

分 类 号：TU5[建筑科学—建筑技术科学]