龙门加工中心综合误差建模与实时补偿  

Comprehensive Error Modeling and Real-Time Compensation of Gantry Machining Centers

作　　者：廖嘉琦 倪俊芳[1] 宋世通 LIAO Jia-qi;NI Jun-fang;SONG Shi-tong(School of Mechanical and Electrical Engineering,Soochow University,Suzhou 215137,China;Neway CNC Equipment(Suzhou)Co.,Ltd,Suzhou 215004,China)

机构地区：[1]苏州大学机电工程学院,江苏苏州215137 [2]纽威数控装备(苏州)有限公司,江苏苏州215004

出　　处：《电工电气》2025年第3期60-63,68,共5页Electrotechnics Electric

摘　　要：加工中心的热变形误差是衡量其加工精度的关键指标之一。为有效降低热变形对机床加工精度的影响,基于热误差敏感度理论,优化了误差采样的温度测点布置,并结合综合误差建模理论,利用MATLAB软件构建了加工中心的综合误差模型。通过机床外部I/O面板、传感器和数控系统,搭建了误差实时补偿系统,并对龙门加工中心进行了实时补偿分析。实验结果表明,在常温条件下,最大定位误差从162.6μm降至46.3μm,降幅达72%;在热平衡状态下,最大定位误差从71.7μm降至23.6μm,降幅达67%。该方法通过实时补偿机床误差,显著提升了加工精度。The thermal deformation error of machining centers is one of the key indicators for measuring its machining accuracy.In order to effectively reduce the impact of thermal deformation on the precision of machine tools,based on thermal error sensitivity theor,this study optimizes the temperature measurement point layout for error sampling,combines a comprehensive error model,and uses MATLAB software to construct the synthetic error model of machining center.Through the external I/O panel,sensor and CNC system,a real-time error compensation system is established and the real-time compensation analysis of gantry machining center is carried out.Experimental results show that under normal temperature conditions,the maximum positioning error is reduced from 162.6μm to 46.3μm,a reduction of 72%;under thermal equilibrium conditions,the maximum positioning error is reduced from 71.7μm to 23.6μm,a reduction of 67%.This method significantly improves machining accuracy by real-time compensation of machine tool errors.

关 键 词：综合误差建模 误差实时补偿 数控系统 龙门加工中心 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]