AGM隔板湿态回弹能力测试及探讨  

Testing and discussion on the resilience of AGM separator in wet state

作　　者：孙晓飞 韩二莎 王廷华 朱红忠 陈二霞 陈志雪 王静 皇甫志坤 毕锡刚 SUN Xiaofei;HAN Ersha;WANG Tinghua;ZHU hongzhong;CHEN Erxia;CHEN Zhixue;WANG Jing;HUANGPU Zhikun;BI Xigang(FengFan Co.,Ltd.,Baoding Hebei 071051,China)

机构地区：[1]风帆有限责任公司,河北保定071051

出　　处：《蓄电池》2025年第2期86-89,共4页Chinese LABAT Man

摘　　要：采用两种不同的测试方法,对不同厂家的AGM隔板湿态回弹能力进行了测试和分析。结合AGM隔板的基本性能测试和隔板内部微观形貌分析,研究隔板粗细纤维质量比对湿态回弹性的影响。同时模拟了一定压缩量下浸酸(水)过程中AGM隔板湿态压力变化曲线。In this paper,two different test methods are used to test,compare and analyze the wet resilience of AGM separators from different manufacturers.Combined with the basic performance test of AGM separators and the internal microstructure analysis of the separators,the matching ratio of thick and thin fibers in the separators has a greater impact on the wet resilience.At the same time,the wet pressure curve of AGM diaphragm during acid(water)immersion under a certain compression amount is simulated.

关 键 词：铅酸蓄电池 玻璃纤维 AGM隔板 湿态 回弹能力 装配压力 抗拉强度 

分 类 号：TM912.1[电气工程—电力电子与电力传动]