基于单片机的生产线自动打包系统的设计与实现  

Design and Implementation of Automatic Packaging System for Production Line Based on scM

作　　者：严敏 YAN Min(College of Information Engineering,Jiangsu College of Tourism,Yangzhou Jiangsu 225127,China)

机构地区：[1]江苏旅游职业学院信息工程学院,江苏扬州225127

出　　处：《河北软件职业技术学院学报》2025年第1期28-31,共4页Journal of Hebei Software Institute

摘　　要：以AT89C51单片机为控制核心设计了生产线自动打包系统,该系统对生产线上的零件进行计数,数码管实时显示零件个数,当单片机内部的计数器统计生产零件的个数达到预先设定的打包数量时,就会产生计数溢出中断,单片机响应中断,发出打包控制信号,完成对这些生产零件的自动打包处理。在Proteus硬件仿真平台和MedWin V3.0开发环境中分别进行生产线自动打包系统的硬件设计,调试运行,直至成功。A production line automatic packaging system was designed with AT89C51 microcontroller as the control core.The system counts the parts on the production line,and the digital tube displays the number of parts in real time.When the internal counter of the microcontroller counts the number of production parts and reaches the pre-set packaging quantity,a counting overflow interrupt will be generated.The microcontroller responds to the interrupt and sends a packaging control signal to complete the automatic packaging process of these production parts.Design,debug,and run the software and hardware of the automatic packaging system for the production line separately on the Proteus hardware simulation platform and MedWin V3.0 development environment until successful.

关 键 词：单片机 计数器 数码管 

分 类 号：TP368.1[自动化与计算机技术—计算机系统结构]