Concurrent toughening and hardening in AgMgNi alloys by internal oxidation  

作　　者：Bing-Rui Liu Hai-Cheng Zhu Shao-Hong Liu Li-Min Zhou Hao Cui Man-Men Liu Li Chen Ming Wen Hai-Gang Dong Feng Liu Wei Wang Song Li 

机构地区：[1]Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education),School of Materials Science and Engineering,Northeastern University,Shenyang,110819,China [2]State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Yunnan Precious Metals Laboratory Co.,Ltd,Kunming,650106,China [3]Sino-Platinum Metals Semiconductor Materials(Yunnan)Co.,Ltd,Kunming,650106,China

出　　处：《Rare Metals》2024年第12期6625-6638,共14页稀有金属(英文版)

基　　金：financially supported by the National Natural Science Foundation of China(Nos.51977027 and 51967008);Yunnan Key Research and Development Program(No.202102AB080008);the Scientific and Technological Project of Yunnan Precious Metals Laboratory(Nos.YPML-2022050206 and YPML-2023050250)。

摘　　要：Enhancing the ductility of internally oxidized AgMg alloys has posed a longstanding challenge.A new method to achieve simultaneous hardening and toughening of AgMgNi alloys is presented by means of internal oxidation.The influence of Ni content on the internal oxidation process and the mechanical behavior of AgMgNi alloys is systematically investigated.It is found that Ni addition induces grain refinement by forming nanoscale Ni particles,which act as heterogeneous nucleation sites and inhibit grain growth during internal oxidation.This enhances the plasticity and toughness of the alloys via the Hall-Petch effect.The alloys exhibit a conductivity of~42 MS·m^(-1)and surface hardness of~HV125,which are insensitive to the variation of Ni content within 0 wt%-2 wt%.The optimal range of Ni content for achieving the best combination of hardness,strength and toughness is0.15 wt%-0.3 wt%,corresponding to alloys with a tensile strength above 300 MPa and a toughness surpassing3300 MJ·m^(-3).Higher Ni contents reduce the internal oxidation depth(from about 340.6 to about 238.4μm)and the tensile strength(from about 342.1 to about 230.1 MPa)of the alloys by generating micrometer-sized Ni-rich particles in the matrix,which consume oxygen,obstruct some of the oxygen diffusion channels and impede the oxidation front advancement.The non-oxidized region,which does not benefit from oxidation strengthening,diminishes the overall strength of the alloy.These results reveal the crucial role of Ni in regulating the internal oxidation dynamics and microstructure evolution of AgMgNi alloys,and suggest a novel approach for designing high-performance alloys with concurrent hardening and toughening.

关 键 词：HARDENING TOUGHENING Internal oxidation AgMgNi alloy Grain refinement 

分 类 号：TG1[金属学及工艺—金属学]