内嵌多孔的弯折声学超材料吸声性能研究  

Research on sound absorption properties of bending acoustic metamaterials with embedded porous

作　　者：肖英龙 童宗鹏 吴飞 杨明绥 朱晓健 曾秋宇 XIAO Yinglong;TONG Zongpeng;WU Fei;YANG Mingsui;ZHU Xiaojian;ZENG Qiuyu(Shanghai Marine Diesel Engine Research Institute,Shanghai 201108,China;National Engineering Research Center of Special Equipment and Power System for Ship and Marine Engineering,Shanghai 201108,China;AECC Shenyang Engine Research Institute,Shenyang 110013,China;School of Energy and Power,Jiangsu University of Science and Technology,Zhenjiang 212003,China)

机构地区：[1]中国船舶集团有限公司第七一一研究所,上海201108 [2]船舶与海洋工程特种设备和动力系统国家工程研究中心,上海201108 [3]中国航发沈阳发动机研究所,辽宁沈阳110013 [4]江苏科技大学能源与动力学院,江苏镇江212003

出　　处：《舰船科学技术》2025年第6期35-40,共6页Ship Science and Technology

摘　　要：针对中低频宽带噪声控制问题,本文提出一种内嵌多孔的变截面弯折声学超材料。首先采用阻抗转移法和Johnson-Champoux-Allard(JCA)模型构建了变截面弯折超材料单元吸声系数理论模型,设计了在736 Hz处实现0.98的准完美吸声和带宽高达392 Hz高效吸声(吸声系数>0.8)的变截面弯折超材料单元,且厚度仅为48 mm。继而采用有限元方法分析了其宽带高效吸声机理,并验证了理论模型准确性。为了实现中低频超宽带降噪结构的设计,基于临界耦合理论,采用并联耦合的方式实现了424~1500 Hz频率范围内吸声系数0.8以上的中低频超宽带高效吸声复合结构。有限元仿真和实验结果验证了并联变截面弯折吸声复合超材料的吸声效果。所提出的变截面弯折超材料复合结构具有吸声性能好、吸声带宽宽、结构制造简单等特点,可为中低频宽带噪声控制技术提供理论基础和应用参考。This paper proposed a variable cross-section bending acoustic metamaterial with embedded porous materials for controlling broadband noise at medium and low frequencies.Firstly,a theoretical model of the sound absorption coefficient for variable cross-section bending metamaterial unit was established by impedance transfer method and Johnson Champoux Allard(JCA)model.A variable cross-section bending metamaterial unit was designed to achieve quasi-perfect sound absorption of 0.98 at 736 Hz and efficient sound absorption(sound absorption coefficient>0.8)with a bandwidth of up to 392 Hz,with a thickness of only 48mm.Subsequently,the broadband efficient sound absorption mechanism was analyzed using finite element method,and the accuracy of the theoretical model was verified.To achieve the design of noise reduction structures for medium and low frequency ultra-wideband,based on the critical coupling theory,a parallel coupling method was adopted to achieve an efficient sound absorption composite structure with a sound absorption coefficient above 0.8 in the frequency range of 424~1500 Hz.The finite element simulation and experimental results have verified the sound absorption effect of the parallel variable cross-section bending sound absorbing composite metamaterial.The proposed variable crosssection bending metamaterial composite structure has the characteristics of good sound absorption performance,wide sound absorption bandwidth,and simple structural manufacturing,which can provide a theoretical basis and application reference for medium and low frequency broadband noise control technology.

关 键 词：内嵌多孔 变截面 弯折声学超材料 低频超宽带吸声 

分 类 号：U661.44[交通运输工程—船舶及航道工程]