航空燃油补偿器漏油问题研究  

Research on Oil Leakage of Aviation Fuel Compensator

作　　者：周雄 杨子同 ZHOU Xiong;YANG Zitong(Aviation Industry Corporation of China,Ltd.,AVIC Jincheng Nanjing Engineering Institute of Aircraft System,Nanjing 211106,China;The Third Military Representative Office of the Air Force Equipment Department in Nanjing,Nanjing 210008,China)

机构地区：[1]中国航空工业集团公司金城南京机电液压工程研究中心,江苏南京211106 [2]空军装备部驻南京地区第三军事代表室,江苏南京210008

出　　处：《机械工程与自动化》2025年第2期199-200,共2页Mechanical Engineering & Automation

摘　　要：对于航空产品,装配质量是产品质量的重要一环,任何装配差异都有可能导致故障隐患。针对航空燃油补偿器使用中的漏油问题,从现象排查、理论分析、装配模拟和试验验证多个方面着手,确定了挡圈装配不到位、使用中脱出是导致漏油的原因,最后给出了纠正措施,以杜绝此类问题的再次发生。For aviation products,assembly quality is an important part of product quality,and any assembly differences may lead to hidden faults.This article focuses on the problem of oil leakage in aviation fuel compensator during use,Through multiple aspects such as phenomenon investigation,theoretical analysis assemble simulation,and experimental verification,it is determined that improper assembly of the baffle and detachment during use are the causes of oil leakage.Finally,corrective measures are provided to prevent such problems from happening again.

关 键 词：燃油系统 补偿器 挡圈 装配 纠正措施 

分 类 号：TH161.7[机械工程—机械制造及自动化]