Characteristics of hydraulic fracture network in the tight conglomerate reservoir based on a hydraulic fracturing test site  

作　　者：QIN Jianhua XIAN Chenggang ZHANG Jing LIANG Tianbo WANG Wenzhong LI Siyuan ZHANG Jinning ZHANG Yang ZHOU Fujian 

机构地区：[1]Research Institute of Exploration and Development,PetroChina Xinjiang Oilfield Company,Karamay 834000,China [2]Unconventional Petroleum Research Institute,China University of Petroleum(Beijing),Beijing 102249,China [3]State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu 610599 [4]State Key Laboratory of Petroleum Resources and Engineering,China University of Petroleum(Beijing),Beijing 102249,China [5]China National Petroleum Corporation Changqing Oilfield Sulige Gas Field Development Branch,Xi’an 710018,China [6]China University of Petroleum(Beijing)at Karamay,Karamay 834000,China

出　　处：《Petroleum Exploration and Development》2025年第1期245-257,共13页石油勘探与开发(英文版)

基　　金：Supported by the National Natural Science Foundation of China(52274051);CNPC-China University of Petroleum(Beijing)Strategic Cooperative Project(ZLZX2020-01).

摘　　要：In order to identify the development characteristics of fracture network in tight conglomerate reservoir of Mahu after hydraulic fracturing,a hydraulic fracturing test site was set up in the second and third members of Triassic Baikouquan Formation(T1b2 and T1b3)in Ma-131 well area,which learned from the successful experience of hydraulic fracturing test sites in North America(HFTS-1).Twelve horizontal wells and a high-angle coring well MaJ02 were drilled.The orientation,connection,propagation law and major controlling factors of hydraulic fractures were analyzed by comparing results of CT scans,imaging logs,direct observation of cores from Well MaJ02,and combined with tracer monitoring data.Results indicate that:(1)Two types of fractures have developed by hydraulic fracturing,i.e.tensile fractures and shear fractures.Tensile fractures are approximately parallel to the direction of the maximum horizontal principal stress,and propagate less than 50 m from perforation clusters.Shear fractures are distributed among tensile fractures and mainly in the strike-slip mode due to the induced stress field among tensile fractures,and some of them are in conjugated pairs.Overall,tensile fractures alternate with shear fractures,with shear fractures dominated and activated after tensile ones.(2)Tracer monitoring results indicate that communication between wells was prevalent in the early stage of production,and the static pressure in the fracture gradually decreased and the connectivity between wells reduced as production progressed.(3)Density of hydraulic fractures is mainly affected by the lithology and fracturing parameters,which is smaller in the mudstone than the conglomerate.Larger fracturing scale and smaller cluster spacing lead to a higher fracture density,which are important directions to improve the well productivity.

关 键 词：tight conglomerate tight oil hydraulic fracturing test site high-angle coring tensile fractures shear fractures fracture network features 

分 类 号：TE3[石油与天然气工程—油气田开发工程]