卷烟夹胶粒缺陷的改进  

Improvement of Cigarette Adhesive Particle Defects

作　　者：雷耀文 苏龙飞 韦干付[1] Lei Yao-wen;Su Long-fei;Wei Gan-fu(China Tobacco Guangxi Industrial Co.,Ltd.,Nanning 530001,Guangxi Province,China)

机构地区：[1]广西中烟工业有限责任公司,广西南宁530001

出　　处：《科学与信息化》2025年第7期134-136,共3页Technology and Information

摘　　要：国内主流机型卷烟机均采用胶辊型的接装纸上胶装置。在生产过程中,切纸刀直接切割经涂胶后的接装纸,造成接装纸切割装置中产生大量的胶水颗粒,进而产生卷烟夹胶粒缺陷。鉴于此,本文对胶辊型接装纸上胶装置中的控胶辊进行研究,以达到降低卷烟夹胶粒缺陷率的目的。Domestic mainstream cigarette-making machines all use adhesive-roller-type gluing devices for tipping paper.During production,the paper-cutting knife directly cuts the tipping paper after gluing,resulting in a large number of adhesive particles in the paper-cutting device,which in turn causes the cigarette adhesive particle defect.In view of this,this paper studies the adhesive control roller in the adhesive-roller-type tipping paper gluing device to achieve the goal of reducing the rate of cigarette adhesive particle defects.

关 键 词：接装纸 夹胶粒 无胶切割 控胶辊 切纸刀 无胶线 

分 类 号：TS43[农业科学—烟草工业]