气动阀性能测试控制系统设计与应用研究  

Design and Application of Pneumatic Valve Performance Test Control System

作　　者：刘剑飞 许腾飞 高华颖 Jianfei Liu;Tengfei Xu;Huaying Gao(School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai)

机构地区：[1]上海理工大学机械工程学院,上海

出　　处：《建模与仿真》2025年第1期292-300,共9页Modeling and Simulation

摘　　要：为满足工厂气动阀自动化测试需求,本研究设计了一种基于PLC与触摸屏的五通道气动阀性能测试控制系统。该系统采用RS-232通信,利用接近开关传感器、温度传感器、压力传感器、电磁阀等组成测试系统执行气动阀性能测试。并在五通道的基础上进行十通道系统扩展,采用基于RS-485通讯接口的Modbus-RTU协议实现通信,触摸屏作为主站,PLC控制器作为从站。经GxWorks2、FStudio2软件仿真测试及实验结果表明,该控制系统能够实现对气动阀动作时间、密封性、寿命性等参数的测试,系统稳定测试可执行最大开关频率为50Hz,满足气动阀性能的测试需求。In order to meet the requirements of automatic test of pneumatic valves in factories,a five-channel pneumatic valve performance test control system based on PLC and touch screen is designed in this paper.The system uses RS-232 communication,and uses proximity switch sensor,temperature sensor,pressure sensor,solenoid valve and other test systems to test the performance of pneumatic valves.Based on the five-channel system,the ten-channel system is extended,and the Modbus-RTU protocol based on RS-485 communication interface is adopted to realize communication,with the touch screen as the master station and the PLC controller as the slave station.The simulation test and experiment results of Gx Works2 and FStudio 2 software show that the control system can realize the test of parameters such as operation time,sealing and life of the pneumatic valve,and the maximum switching frequency of the system stability test can be performed at 50 Hz,which meets the test requirements of the performance of the pneumatic valve.

关 键 词：高速电磁阀 气动阀 接近开关 PLC 触摸屏 MODBUS 

分 类 号：TH138[机械工程—机械制造及自动化] TH137