渐开线测量过程中的扫描式测头动态响应  

Scanning Probe Dynamic Performance during Involute Measurement

作　　者：卢春霞[1] 姜彬 赵威 Lu Chunxia;Jiang Bin;Zhao Wei(School of Mechatronic Engineering,Xi′an Technological University,Xi′an 710021,China;不详)

机构地区：[1]西安工业大学机电工程学院,西安市710021 [2]西安秦川思源测量仪器有限公司

出　　处：《工具技术》2025年第3期150-153,共4页Tool Engineering

基　　金：陕西省“智能制造”科技重大专项(2019zdzx01-02-02)。

摘　　要：随着齿轮测量中心测量速度的增大,测头的动态响应特性成为影响测量精度的关键因素。本文设计齿轮测量中心的多种测头接口,并基于三种不同的扫描式测头进行渐开线样板测量实验,对齿轮测量中心的联动误差、测头响应和测量结果进行分析。实验结果表明,测量误差主要来源于测头的动态响应特性。With the improvement of the measurement speed of the gear measuring center,the dynamic performance of the probe becomes a key factor which affects the measurement accuracy.In this paper,multiple probe interfaces of gear measuring center are designed.Master measurement experiment is carried out based on three different scanning probes,and the linkage error,probe response and measurement results of the gear measuring center are analyzed.The experimental results show that the dynamic performance of the probe is the main source of the measurement error.

关 键 词：齿轮测量中心 测量误差 扫描式测头 动态响应 

分 类 号：TG86[金属学及工艺—公差测量技术] TH124[机械工程—机械设计及理论]