基于三维建模的服装样板设计优化方法研究  

Research on Optimization Methods for Garment Pattern Design based on 3D Modeling

作　　者：姜泽虹 岳文侠 曹蓓[1] JIANG Zehong;YUE Wenxia;CAO Bei(Fashion Institute,Shaanxi Institute of Fashion Engineering,Xi'an 712046,China)

机构地区：[1]陕西服装工程学院服装学院,陕西西安712046

出　　处：《西部皮革》2025年第6期84-86,共3页West Leather

基　　金：2024年陕西服装工程学院特色本科课程“三维服装模拟技术”(2024TSKC002)。

摘　　要：针对传统二维服装样板设计在人体曲面适配与动态场景下面临的误差难题,文章提出基于三维建模的智能化优化方法。通过集成曲面展平技术、动态压力平衡算法及弹性补偿机制,实现三维人体模型向二维样板的精准转化。实验表明,动态压力平衡算法使运动场景下肩部压力峰值降低40%,弹性补偿算法将面料误差控制在±2%以内。研究为服装智能制造提供了高精度、低成本的解决方案,验证了三维建模技术在工业级定制中的应用潜力。To address the challenges of human body surface adaptation and dynamic fitting accuracy in traditional 2D garment pattern design,this study proposes an intelligent optimization method based on 3D modeling.By integrating surface flattening technology,dynamic pressure balance algorithms,and elastic compensation mechanisms,precise conversion from 3D human body models to 2D patterns is achieved.Experimental results demonstrate that the dynamic pressure balance algorithm reduces peak shoulder pressure by 40% in motion scenarios,while the elastic compensation algorithm controls fabric error within ±2%.This research provides a high-precision,low-cost solution for intelligent garment manufacturing and validates the application potential of 3D modeling technology in industrial-grade customization.

关 键 词：三维建模 服装样板设计 曲面展平技术 动态压力平衡 弹性补偿算法 工业级定制 

分 类 号：TS941.2[轻工技术与工程—服装设计与工程]