PVC机器人枪嘴更换周期的建立  

Establishment of PVC Robot Nozzle Changing Cycle

作　　者：田孟辙 刘峰 王飞 杨宝祥 杜尚垒 张海波 TIAN Meng-zhe;LIU Feng;WANG Fei;YANG Bao-xiang;DU Shang-lei;ZHANG Hai-bo(Beijing Benz Automotive Co.,Ltd.,Beijing 100176,China)

机构地区：[1]北京奔驰汽车有限公司,北京100176

出　　处：《现代涂料与涂装》2025年第4期36-40,共5页Modern Paint & Finishing

摘　　要：以PVC机器人经常使用的3D枪嘴、旋转枪嘴、FAD枪嘴和针形枪嘴为例,详细研究了枪嘴磨损对机器人喷涂胶形的影响,通过分析枪嘴宽度或直径与喷涂胶宽及各枪嘴涂胶总长度的关系,确立了PVC机器人枪嘴更换周期,有效避免了枪嘴未及时按期更换造成的批量质量问题,规范了枪嘴管理制度。This article shows four examples about 3D nozzle,swirl nozzle,FAD nozzle and needle nozzle that PVC robot often use.It researches the influence from nozzle broken to robot application spray pattern in detail.Through the relationship analysis between the nozzle width or diameter,spray pattern width and the total application length of all the nozzles,PVC robot nozzle changing cycle is established.It avoids the batch quality issues that originated from the nozzle not changed in time effectively,the nozzle management system is also regulated.

关 键 词：密封胶 枪嘴 胶形 周期 

分 类 号：TQ639[化学工程—精细化工]