检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘建华 李东东 李豪 LIU Jianhua;LI Dongdong;LI Hao(School of Electric Power Engineering,Shanghai University of Electric Power,Shanghai 200090,China)
机构地区:[1]上海电力大学电气工程学院,上海市200090
出 处:《电力建设》2025年第4期38-48,共11页Electric Power Construction
基 金:国家自然科学基金项目(51907116)。
摘 要:【目的】双向变流器集牵引、回馈、无功补偿为一体,是城轨直流牵引供电系统主设备升级的主要选择方案。在低压直流牵引供电领域,变流器具备低电压大电流特性,T型三电平多单元并联结合载波移相技术更易满足城轨直流牵引供电系统对主设备低成本、低谐波、高功率密度、高效率、宽直流电压运行范围的特殊要求,但存在零序环流过大和中点电位不平衡问题。【方法】首先针对双向变流器的环流问题,建立零序环流模型,对环流分类分析,提出变压器低压绕组分裂、共用中线、L型滤波器和软件控制算法抑制零序环流;其次针对中点电位不平衡问题,在实现等效空间矢量脉宽调制的基础上,通过分析T型三电平单相拓扑结构,发现中点电位与相电压、相电流极性及空间矢量种类有关,据此提出一种基于反馈补偿的中点电位平衡控制方法。【结果】基于PSCAD/EMTDC开展仿真测试,发现各类零序环流可以得到有效抑制,在变流器四象限运行时实现三电平变流器中点电位平衡。【结论】所提环流抑制方法不仅可以抑制各类零序环流,还有助于减少三电平中点电位量测成本;所提中点电位控制方法无需进行复杂的空间矢量调制过程,计算量小,实现过程简便,可有效控制中点电位。[Objective]A bidirectional converter integrates traction,feedback,and reactive power compensation and is the primary choice for upgrading the main equipment of an urban rail DC traction power supply system.In the field of low-voltage DC traction power supply,converters have the characteristics of low voltage and high current.The T-type three-level multi-unit parallel connection combined with carrier phase-shifting technology can meet the special requirements of low cost,low harmonic,high power density,high efficiency,and wide DC voltage operation range of urban rail DC traction power supply systems for the main equipment.However,this approach has problems such as excessive zero-sequence circulating currents and unbalanced midpoint potentials.[Methods]First,a zero-sequence circulating current model is established to address the circulating current problem in bidirectional converters.The circulating current is classified and analyzed,and a transformer low-voltage winding splitting,shared neutral line,L-shaped filter,and software control algorithm are proposed to suppress the zero-sequence circulating current.Second,in response to the problem of midpoint potential imbalance and based on the implementation of the equivalent space vector pulse width modulation,the relation of the midpoint potential to the phase voltage,phase current polarity,and space vector type is established by analyzing the T-shaped three-level single-phase topology structure.Accordingly,a feedback-compensation-based midpoint potential balance control method is proposed.[Results]Based on PSCAD/EMTDC simulation testing,it was found that various zero-sequence circulating currents could be effectively suppressed,achieving a midpoint potential balance in three-level converters during four-quadrant operation.[Conclusions]The proposed circulating current suppression method can not only suppress various zero sequence circulating currents,but also help reduce the cost of measuring the midpoint potential of three-level systems.The proposed midpoint potenti
关 键 词:柔性直流 T型三电平 双向变流器 环流抑制 中点电位平衡
分 类 号:TM922.3[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222