卷烟纸参数对卷烟锥高的影响  

Effect of Cigarette Paper Parameters on Cigarette Cone Height

作　　者：李欢 唐小雪[2] 康金岭[1] 李宇飞[1] 陈飞程 柴精精 彭罡星 王建民 周利军 王迅 LI Huan;TANG Xiaoxue;KANG Jinling;LI Yufei;CHEN Feicheng;CHAI Jingjing;PENG Gangxing;WANG Jianmin;ZHOU Lijun;WANG Xun(Liuzhou Cigarette Factory,China Tobacco Guangxi Industrial Co.,Ltd.,Liuzhou,Guangxi Zhuang Autonomous Region,545001;Technology Center,China Tobacco Guangxi Industrial Co.,Ltd.,Nanning,Guangxi Zhuang Autonomous Region,530001;Logistics Center,China Tobacco Guangxi Industrial Co.,Ltd.,Nanning,Guangxi Zhuang Autonomous Region,530001;School of Tobacco Science and Engineering,Zhengzhou University of Light Industry,Zhengzhou,He’nan Province,450000;Qingdao Cigarette Factory,China Tobacco Shandong Industrial Co.,Ltd.,Qingdao,Shandong Province,266100)

机构地区：[1]广西中烟工业有限责任公司柳州卷烟厂,广西柳州545001 [2]广西中烟工业有限责任公司技术中心,广西南宁530001 [3]广西中烟工业有限责任公司物流中心,广西南宁530001 [4]郑州轻工业大学烟草科学与工程学院,河南郑州450000 [5]山东中烟工业有限责任公司青岛卷烟厂,山东青岛266100

出　　处：《中国造纸》2025年第3期70-75,共6页China Pulp & Paper

基　　金：广西中烟工业有限责任公司科技创新项目(GXZYCX2023A006)。

摘　　要：为了探究卷烟纸参数对燃烧锥高的影响规律,按照均匀实验设计原则,选取定量、透气度等6项卷烟纸参数,卷制了12种不同参数水平的卷烟样品,并进行了单因素方差分析与回归分析。结果表明,12种不同卷烟纸参数组合对应的卷烟锥高介于7.958~10.455 mm,相对标准偏差介于2.5%~11.7%;透气度、钠钾比、碳酸镁用量、助燃剂用量4项卷烟纸参数综合作用可解释锥高变化的94.0%,是影响卷烟锥高的主要因素,定量、酸根类型是影响锥高的次要因素;主要因素对锥高影响较小时,卷烟锥高较低,有利于降低燃烧锥落头倾向。In order to explore the influence of cigarette paper parameters on combustion cone height,six cigarette paper parameters includ-ing quantitative and air permeability were selected according to the principle of uniform experimental design.Twelve cigarette samples with different parameter levels were rolled and subjected to one-way analysis of variance and regression analysis.The results showed that the ciga-rette cone heights corresponding to 12 different combinations of cigarette paper parameters ranged from 7.958 to10.455 mm,with relative standard deviation ranging from 2.5%to 11.7%.The comprehensive effect of four cigarette paper parameters,including breathability,sodi-um potassium ratio,magnesium carbonate addition,and combustion assisting dose,could explain 94.0%of the variation in cone height,which was the main factor affecting cigarette cone height.Quantification and acid radical type were secondary factors affecting cone height.When the main factor had a small impact on cone height,the cone height of cigarettes was lower,which was beneficial for reducing the ten-dency of combustion cone to fall off.

关 键 词：卷烟纸 锥高 均匀实验 卷烟燃烧锥 

分 类 号：TS76[轻工技术与工程—制浆造纸工程]