基于数据驱动的相衬OCT量程扩展方法及实验验证  

Data-Driven for Phase-Contrast OCT Range Expansion Method and Experimental Verification

作　　者：曹鑫 董博[1,2] 白玉磊 Cao Xin;Dong Bo;Bai Yulei(School of Automation,Guangdong University of Technology,Guangzhou 510006,Guangdong,China;Key Laboratory of Intelligent Detection&Manufacturing Internet of Things,Ministy of Education,Guangdong University of Technology,Guangzhou 510006,Guangdong,China)

机构地区：[1]广东工业大学自动化学院,广东广州510006 [2]智能检测与制造物联教育部重点实验室(广东工业大学),广东广州510006

出　　处：《光学学报》2025年第2期172-182,共11页Acta Optica Sinica

基　　金：广东省自然科学基金(2024A1515010230);国家自然科学基金(62475048)。

摘　　要：在相衬光学相干层析成像系统中,根据奈奎斯特采样条件,减少干涉信号的采样点数会导致差分包裹相位因欠采样而出现混叠现象,从而影响系统测量量程。为此,提出了一种基于数据驱动的方法。该方法通过大量数据训练卷积神经网络,以学习欠采样干涉信号的实部与虚部到过采样干涉信号的实部与虚部的重构,在预测阶段结合相衬技术和矢量法,可以计算得到过采样情况下样本对应的相位及应变。力学加载实验和热加载实验表明:该方法在33%采样点的情况下,能有效地恢复出过采样相位并计算出对应的应变,从而最多可以将应变量程提高3.0倍,且重构的相位和应变的均方误差分别维持在2和0.0003左右。所提方法对研究样品深层区域的力学特性和实现样本内部深部区域的层析快速成像具有重要的参考价值。Objective Phase-contrast optical coherence tomography(PC-OCT)integrates phase-contrast techniques with optical coherence tomography.It is applicable to the mechanical characterization and testing of various biological tissues and nonbiological materials.It has the potential for early disease diagnosis or early detection of damage and becomes an important direction for future functional imaging development.However,according to the Nyquist sampling theorem,the measurement range of system strain is limited by the sampling frequency of the interference signal.Reducing the sampling rate will inevitably lead to aliasing artifacts in the acquired phase images,making strain calculation difficult.Therefore,without changing the existing structure of the PC-OCT system,designing a phase reconstruction method for spectral undersampling in PC-OCT can extend the measurement system’s depth range.This significantly reduces the sampling rate requirements of the measurement system,thus enabling rapid imaging of the deep internal regions of materials.This is crucial for the early diagnosis of diseases and the detection of damage.Methods We present a data-driven convolutional neural network(CNN)method for phase reconstruction in spectral undersampling of PC-OCT to extend the strain depth range of PC-OCT.First,we use the self-built PC-OCT system to collect the original interference signals of various types of composite materials under different loading conditions.After preprocessing such as interpolation,we obtain simulated undersampling and oversampling interference signals.The real and imaginary parts of the undersampling signals are the inputs,while the real and imaginary parts of both undersampling and oversampling signals are the inputs and labels for training the CNN.Then,after the network training is completed,we design two new sets of experiments.We collect interference signals sorted by time frames using the self-built PC-OCT.We randomly select interference signals from two consecutive time frames for undersampling processi

关 键 词：成像系统 光学相干层析成像 相衬技术 量程扩展 数据驱动 

分 类 号：TP391.4[自动化与计算机技术—计算机应用技术]