提高氟醚橡胶与金属粘接质量的方法研究  

Research on Methods to Improve the Bonding Quality BetweenFluoroether Rubber and Metals

作　　者：赵晴 杨子同 ZHAO Qing;YANG Zitong(AVIC Jincheng Nanjing Engineering Institute of Aircraft System,Nanjing 211106,China;93145 Troops,Nanjing 211106,China)

机构地区：[1]航空工业金城南京机电液压工程研究中心,江苏南京211106 [2]93145部队,江苏南京211106

出　　处：《山东化工》2025年第7期136-138,141,共4页Shandong Chemical Industry

摘　　要：针对生产中氟醚橡胶与金属粘接不合格的问题开展课题研究,从人、机、料、法、环、测六个方面进行分析和研究,确定胶料配方是影响粘接的主要原因,在原材料配方允许的公差范围内进行微调,胶料粘接强度显著提高,力学试样的粘接强度由2.7 MPa提升到6.6 MPa;附胶情况也明显更好,由最初的界面破坏转至100%橡胶破坏。A research project was conducted to address the issue of poor adhesion between fluoroether rubber and metals in production.Analysis and study were conducted from six aspects:human,machine,material,method,environment,and measurement.It was determined that the rubber formula was the main reason affecting adhesion.Micro adjustments were made within the allowable tolerance range of the raw material formula,and the adhesive strength of the rubber material was significantly improved.The adhesive strength of the mechanical specimen increased from^(2).7 MPa to 6.6 MPa.The adhesive adhesion is also significantly better,shifting from initial interface failure to 100%rubber failure.

关 键 词：氟醚橡胶 胶黏剂 粘接强度 

分 类 号：TQ333.93[化学工程—橡胶工业]