基于焓、火用分析的工业锅炉能效软件开发  

Development of Industrial Boiler Efficiency Software Based on Enthalpy and Exergy Analysis

作　　者：郎冬余 包钢[1] 林贺勇 孙超 谢华清 LANG Dongyu;BAO Gang;LIN Heyong;SUN Chao;XIE Huaqing(Shenyang Institute of Special Equipment Inspection and Research,Shenyang,110035,Liaoning,China;Yingkou Boiler and Pressure Vessel Inspection and Research Co.,Ltd.,Yingkou 115003,Liaoning,China;Northeastern University School of Metallurgy,Shenyang 110819,Liaoning,China)

机构地区：[1]沈阳特种设备检测研究院,辽宁沈阳110035 [2]营口市锅炉压力容器检验研究有限公司,辽宁营口115003 [3]东北大学冶金学院,辽宁沈阳110819

出　　处：《工业锅炉》2025年第2期10-16,共7页Industrial Boilers

摘　　要：随着环保意识的提高,人们对生物质工业锅炉的研究越来越深入,也对生物质锅炉的节能要求越来越高,所以需对其进行能效分析,通过节能诊断,进而进行节能改造,而现有的能效分析软件数量少且不完善,介绍一款在原有软件基础上开发的新软件,并运用开发的软件对收集到的16组运行数据进行计算和分析,针对分析结果提出了合理的节能措施及建议。With the improvement of environmental awareness,people's research on biomass-fired industrial boilers is becoming more and more in-depth,and the energy-saving requirements for biomass-fired boilers are also becoming higher and higher.So it is necessary to conduct energy efficiency analysis,diagnose energy conservation,and then carry out energy-saving transformation.However,the existing efficiency analysis software is few and imperfect,so a new software based on the existing software has been developed.The developed software was used to calculate and analyze the collected 16 sets of operational data,and reasonable energy-saving measures and suggestions were proposed based on the analysis results.

关 键 词：生物质工业锅炉 软件开发 能效分析 火用分析 

分 类 号：TK222[动力工程及工程热物理—动力机械及工程]